TJA1028T/3V3/10/2Z

TJA1028T/3V3/10/2Z Application Field and Working Principle

TJA1028T/3V3/10/2Z is an ON Semiconductor Automotive Interface Part specifically designed for Diagnostic Communication (UDS) in cars. It is a compact and easy-to-use transceiver module with support for up to 6 signal channels. The module complies to all the standards of the Single Edge Nibble Transmission (SENT) protocol, making it an ideal solution for automotive diagnostic protocols.

The TJA1028T/3V3/10/2Z is a fully compliant transceiver module that provides a data transfer rate of up to 10 Mb/s while still consuming only 1.8 Watt of power. Provided with 6 independent signals lines, it can connect up to two IC’s; the base-IC and the diagnostic IC. The data transfer between them is based on a differential Single Edge Nibble Transmission (SENT) protocol.

The TJA1028T/3V3/10/2Z has a wide range of features to maximize the efficiency of the data transfer. It includes features such as an integrated Galvanic Isolation, support for different diagnosis modes and in-circuit programming. These features, coupled with the low power consumption, make it a great choice for automotive and industrial applications.

The TJA1028T/3V3/10/2Z provides a digital output signal which is used to send the data over UDS. The data transmission rate can be adjusted from 0.3 Mbps to 10 Mbps, according to the application. The TJA1028T/3V3/10/2Z is also provided with a shutdown status (STS) signal, which allows the external IC to be switched off during periods of no activity.

The working principle of the TJA1028T/3V3/10/2Z is based on a differential Single Edge Nibble Transmission (SENT) protocol. This protocol defines an interface that is used to transmit data in the form of nibbles. Each nibble consists of 4 bits and can transmit data up to 10 Mbps over 6 signal lines. The TJA1028T/3V3/10/2Z receives the data sent over the 6 signal lines and converts it into a digital output signal. The digital output signal is compatible with different automotive diagnostic protocols.

The TJA1028T/3V3/10/2Z has a wide range of applications in automotive and industrial applications. It can be used to connect different types of IC’s for diagnostic purposes. It can also be used in communication systems for automotive communications, such as CAN, LIN and FlexRay. The TJA1028T/3V3/10/2Z can also be used as an automotive interface for in-circuit programming of microcontrollers used in car components.

In conclusion, the TJA1028T/3V3/10/2Z is an ideal solution for automotive and industrial applications. It provides a digital output signal with support for up to 6 signal lines, and is compliant with the standard SENT protocol. The module is also provided with features such as Galvanic Isolation, support for different Diagnostic Modes and in-circuit programming, which makes it a great choice for a wide range of applications.