TJA1040T/N1,518 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

The TJA1040T/N1,518 is a high-speed interface that is capable of providing high speed data transmission speeds up to 518 Mbps. It is notably suitable for applications where data needs to be transmitted quickly, or where delays have an effect on the results of the transmission. This interface is an extremely popular choice due to its reliability, low cost and ease of use. This article will discuss the various application fields of the TJA1040T/N1,518, as well as its working principle.

Application Fields:

The TJA1040T/N1,518 has a number of different application fields, due to its versatile design. It is commonly used in the automotive, telecoms and consumer electronics fields. In particular, it is a popular choice for applications that require high data rates, such as in-car infotainment systems, telephone systems, as well as for consumer products such as integrated entertainment systems and game consoles.

It is suitable for use in automotives due to its ability to transmitted a large amount of data in a short amount of time. In particular, it is often used in automotive diagnostic tracking and in automatic emergency response systems. It is also used to control in-car entertainment systems, such as audio systems and GPS navigation systems, as well as other applications such as Intelligent Transportation Systems.

In the telecoms field, the TJA1040T/N1,518 is used to enable high-speed data transfer, such as voice and video. It is also suitable for long-distance data transfer, due to its reliable connection and low power consumption.

In the consumer electronics field, the TJA1040T/N1,518 is used to provide high-speed data transfer capabilities to products such as game consoles and integrated entertainment systems.

The TJA1040T/N1,518 also has applications in industrial automation systems and military communication systems.

Working Principle:

The TJA1040T/N1,518 is based on the CAN protocol and uses a single twisted pair of wires. It uses differential signaling, which allows it to operate reliably in noisy environments. It operates in half-duplex mode, which means that it can only send or receive data at a time, but not both.

The TJA1040T/N1,518 uses a Manchester-style encoding scheme to encode data into a digital signal. It then uses Manchester encoding to decode data from the digital signal back into its original form. This process ensures that data is accurately and reliably transmitted over the network.

The TJA1040T/N1,518 uses an 8-bit Low Power Consumption Serial Interface (LPCSI) bus to facilitate efficient access to the bus. The LPCSI bus is used to configure a data rate for the interface and also for multiple-access arbitration. It is powered by a 5v supply and uses an active low control signal to indicate when the TJA1040T/N1,518 is in an active or inactive state.

The TJA1040T/N1,518 is designed to operate within an Industrial Temperature Range (ITS) of -40 to +85 degrees Celsius as well as an extended temperature range of -45 to +125 degrees Celsius. It is also designed to be highly resistant to electromagnetic interference and is suitable for use in very demanding environments.

Conclusion:

The TJA1040T/N1,518 is a versatile and reliable high-speed interface that is suitable for use in many different application fields. It is based on the CAN protocol and uses differential signaling to operate reliably in noisy environments. Its Manchester-style encoding ensures that data is accurately and reliably transmitted over the network. It is also designed to operate within extreme temperatures, is highly resistant to electromagnetic interference, and requires low power consumption.

The specific data is subject to PDF, and the above content is for reference