TJA1080ATS/2/T,112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TJA1080ATS/2/T,112 is a high performance network interface controller developed by NXP Semiconductors. It is a single chip solution that provides an interface between Local Interconnect Network (LIN) nodes and an embedded system. It bridges the physical layer of LIN with a protocol stack that supports LIN and UART transactions. The device allows easy integration of external sensors and actuators into a LIN network.

The range of applications for the TJA1080ATS/2/T,112 mainly depends on its high-performance communication capabilities. It is mainly used for automotive applications such as on-board diagnostics, vehicle control systems, and real-time physical layer communication for automotive networks. The device is also used for industrial applications such as factory automation and consumer applications.

The TJA1080ATS/2/T,112 is based on the single-wire LIN protocol. It uses a single hardware interface to perform communication between LIN nodes and the host application processor. The protocol stack supports a combination of LIN and UART protocols and is compatible with LIN version 2.1. The device is fully compliant with Transparent Parameter Negotiation, a specification of the LIN version 2.0 specification.

The TJA1080ATS/2/T,112 supports a wide range of communication modes. It supports both single (MASTER) and multi-node (SLAVE) modes. The device also supports different baud rates ranging from 10 kbit/s to 20 Mbit/s. The device can be configured to support a single or multi-master communication mode. It supports full-duplex communication as well as half-duplex communication with low latency and high data rates.

The TJA1080ATS/2/T,112 also supports low-power operation. It is designed to require very low power so it can be used in battery operated devices. The device supports multiple power saving modes that allow it to run in low-power mode when the system is idle, reducing the overall power consumption.

The TJA1080ATS/2/T,112 also supports safety-critical applications. It is compliant with the ISO 26262 standard, allowing it to be used in systems with ASIL-D certification requirements. It also has a range of advanced features, such as network collision detection, time-out detection and wake-up detection.

Overall, the TJA1080ATS/2/T,112 is a highly efficient and reliable single-chip interface solution that enables users to easily integrate external sensors and actuators into a LIN network. It supports a wide range of communication modes and is designed with low-power operation and safety-critical applications in mind.

The specific data is subject to PDF, and the above content is for reference