TJA1041T/V,512

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TJA1041T/V,512 is a transceiver and driver of the CAN (Controller Area Network) interface, believed to be part of the TJA1041 family from NXP Semiconductors Europe. It is a physical layer device that is intended for application in higher-speed CAN-transceivers and operates at a speed up to 1 MBps.

The TJA1041T/V,512 is available in the following package options – VQFN24,SO28,TSSOP28 and UFDFPN24. It has an extension sub buffer input voltage of ±12 V and common mode voltage range of between 4 V to 5.5 V. The features of this device includes integrated termination resistor, low propagation delay, wide common-mode range, narrow 0.3 V hysteresis window and improved robustness against noise and gunshots. In addition, it has advanced current consumption features and integrated overvoltage protection.

One of the primary application fields of the TJA1041T/V is automotive applications. It is the ideal solution for modules built up to meet the requirements for extreme environmental conditions of an automobile. It is able to operate within a temperature range of -40°C to +125°C without any sacrifice of reliability. This device is also suitable for industrial applications that requires high potential system robustness, very low electromagnetic emission and immunity.

The transceiver TJA1041T/V,512 works on the principle of data transmission known as differential signaling. This is a data transmission system in which the signals that are sent to the transmitter are transmitted as voltage difference on two lines and received by the receiver in the same way. This kind of signaling system is superior to single-ended wire transmission because it has better noise proofing. The two wires of the differential signaling system act as the source and the sink circuit of the current. When there is any external noise sourced voltage, the two lines will be conductive with equal differences in voltage level.

The TJA1041T/V,512 is based on a split supply that is generated by an external voltage regulator unit. This split supply generates two power sources, one for the transmitter part and another for the receiver part. The transmitter side output is connected to the receiver side input through a 4-wire bus. The controller sends digital data to the transmitter which is then converted into electrical signals for the transmitter and then transmitted to the receiving side.

The receiver part of the TJA1041T/V,512 is designed to detect the incoming signal and convert it into an analog value. This analog value is compared with previous data by the controller to decide if the data is same or different. If it is same, then the controller simply ignores the data, otherwise it stores the data for further processing.

In summary, the TJA1041T/V,512 is a transceiver and driver of a CAN interface which is tailored for operation in harsher environments, such as in automobiles or in industrial applications. It is based on a differential signaling principle and a split supply, with a transmitter part and a receiver part, making efficient transmission and receipt of data possible.

The specific data is subject to PDF, and the above content is for reference