TJA1055T,512

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TJA1055T,512 is an interface driver, receiver, and transceiver, designed by NXP Semiconductors. It supports and facilitates the communication between a controller and a board. This device is highly suitable for CIC, LIN and CAN automotive applications such as monitoring, analysis and control.

The TJA1055T,512 has two transceivers which are implemented in a single IC. The first transceiver is used for the reset of IC, whereas the second can be used for toggling and data transfer operations. Both the transceivers have a voltage ranging from 5V to 25V. This device has a wide temperature range which makes it suitable for all types of automotive applications.

The TJA1055T,512 contains the CAN, LIN and CAN FD protocols. It is also equipped with the transmit data block, receive data block and communications bus integrity features. This device has an integrated voltage regulator, differential receiver, and a low-voltage detector. Additionally, the TJA1055T,512 has shielded twisted line (STL) and Low Pin Count (LPC) technology.

The TJA1055T,512 has an integrated local interconnect network (LIN) transceiver and an integrated CAN FD transceiver. The CAN FD protocol is used in high-speed FlexRay automotive applications which require high data rates. The CAN FD protocol enables high speed transfer of data with an improved error detection and fault tolerance. The TJA1055T,512 also supports LIN communication, which is a low-cost, highly reliable network used in automotive applications.

The TJA1055T,512 supports a range of microcontrollers, including the NXP S32K14x, S32K148, S32K2xx, S32K3xx, LX550, MX6UL, PX5 and STM32F2xx series of microcontrollers. It is also compatible with the DSP5C, LPC5514, LPC58xx and Renesas R0F71720 series of microcontrollers. This device is easy to use, as it is easy to program and configure.

The working principle behind the TJA1055T,512 is simple. The controller sends the data at certain intervals, and the device receives the data, processes it, and verifies it before transmitting it to the required destination. The TJA1055T,512 also provides automatic data transmission and error control protocol (ECP) for CAN, LIN and CAN FD protocols. This device is highly reliable and provides high performance for the applications it is used for.

The TJA1055T,512 is used in multiple industries for various applications such as fuel supply, engine monitoring and control, car audio systems, body electronics, etc. It can also be used for car exterior lighting, powertrain control, immobilizers and door locks, climate control, and diesel engine controls. With its integrated voltage regulator, differential receiver and low-voltage detector, this device makes sure that the transmitted data is accurate and reliable.

The TJA1055T,512 is a highly reliable interface driver, receiver, and transceiver designed by NXP Semiconductors. It is suitable for use in CIC, LIN, and CAN automotive applications, allowing data transmission, error control, and ECP protocol. This device supports all microcontroller series and provides top-level performance. Furthermore, its wide temperature range, low-voltage detector, and shielded twisted line (STL) and Low Pin Count (LPC) technology make it one of the best devices for interface drivers, receivers, and transceivers.

The specific data is subject to PDF, and the above content is for reference