TLC7528IPW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLC7528IPW is an 8-bit voltage output Digital-to-Analog Converter (DAC), classified under the data acquisition family. It is among the most innovative converter in its category and also one of the smallest DACs due to its 5mm x 5mm package size. It provides high precision and low noise of 0.5mV resolution and 6uV noise PSU, respectively. The TLC7528IPW DAC is a suitable option for applications that require precision and ease of implementation such as system control, software calibration, multiple loop control, etc. It offers very fast settling time, low power consumption and is available in two different temperature ranges.

The TLC7528IPW comes with an array of features and functionalities, making them suitable for various fields of applications. One of the primary uses of the TLC7528IPW is in the field of instrumentation, where it is used for measurements, calibrations and monitoring of equipment. Motors and servomotors are also common areas of application, where the high and fast settling time of the TLC7528IPW proves to be very beneficial. The DAC is also used in obtaining accurate voltage levels for different stages of signal conditioning with very low to no power dissipation. Apart from that, it is also used in sensing and control systems, test and measurement and also in acceleration, velocity and force control systems in automotive applications.

The TLC7528IPW has a simple and efficient architecture, where a linear signal is converted from digital to analog, with the help of a successive approximation register or SAR. The AD converter consists of a set of comparators, registers and a voltage ramp generator. The TLC7528IPW is also equipped with a voltage switch for the digital to analog conversion and a 2-channel multiplexer for the analog multiplexing which is enabled and disabled by the Volatile RAM (VRAM) controller.

The VRAM controller provides 8-bit resolution in both the DAC channels, which is further enhanced by a 16-bit resolution DAC. The half-ladder configuration is used to build a 4-bit and 6-bit resolution in the 1st and 2nd DAC channels, respectively. The half-ladder configuration ensures a wide linearity range and resolution with both the DAC channels, guaranteeing low noise and accurate conversion. The linearity range can be further improved by the use of special codes that allow the bias currents to be adjusted.

The VRAM controller also senses the input voltage and provides an output voltage via the open collector outputs, from which the current-sensing feedback is generated. This current-sensing feedback helps in controlling the power supply, resulting in a very low power consumption. This precision and high accuracy makes it suitable for applications involving small and ultra-low power consumption.

To ensure reliable operation, the TLC7528IPW is also equipped with an analog noise filter, which serves to reduce the high frequency noise that may be present during the DAC operation. The filter also improves the accuracy and performance of the DAC, by removing undesirable artifacts from the input and output signals. The DAC also features user-programmable high and low performance limits, to prevent any unwanted out-of-range outputs and over-voltage trips.

To conclude, the TLC7528IPW is an innovative Digital-to-Analog converter, which can perform a variety of data acquisition and is suitable for a wide range of applications, including instrumentation, motor and servomotor control, signal conditioning, and automotive control and measurement. The wide linearity range and high resolution combined with low noise and extremely low power consumption makes it an ideal choice for systems demanding high accuracy, speed and reliability.

The specific data is subject to PDF, and the above content is for reference