TLC7703IPWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The Texas Instruments TLC7703IPWG4 is a general-purpose supervisor integrated circuit (IC). It is a type of power management integrated circuit (PMIC) designed for the monitoring and control of voltage in electronic systems. The TLC7703 is designed for a variety of safety-critical applications and is especially suited for applications where low current draw and high accuracy are critical. This article will discuss the application field and working principle of the TLC7703IPWG4.

The TLC7703IPWG4 is used in a wide variety of applications, from automotive to consumer applications. It can be used in systems that require monitoring and control of voltage, such as embedded systems or microprocessor-based systems. The TLC7703 is designed to monitor and control voltage for voltage surge protection, power-on reset, as well as power supply sequencing and fault detection. It can also be used to prevent system lockout during power system brownouts.

In addition to monitoring and controlling voltage, the TLC7703IPWG4 provides additional features such as temperature sensing, overvoltage and undervoltage protection, overcurrent protection, brownout and reverse polarity protection, and short-circuit protection when used in automotive applications. It also includes a two-wire programmable output that can be used to drive an external alarm or reset circuit.

The power management circuit on the TLC7703IPWG4 monitors input voltage and current and issues alarms or resets the system when the required operating parameters are exceeded. The power management circuit also provides overcurrent protection, fault detection, and loop stabilization.

The TLC7703IPWG4 is a single-supply supervisor IC and it requires a single power source for its operation. It is designed for use with a low-impedance power source that does not exceed the maximum-rated current of the supervisor IC, which is usually around 20 mA. The maximum operating voltage is typically 6.0V, which allows it to be used with a wide range of input voltages.

The TLC7703IPWG4 includes an open-drain output that can be pulled low when an overvoltage or undervoltage condition is detected. The output can also be used to drive a reset signal, an alarm signal, or an external oscillator. The output can also be used as an input to an external power management circuit.

The TLC7703IPWG4 can be used to monitor and control voltage and current in many different types of applications. It is very versatile and is suitable for many types of low-power and high-accuracy applications. It can be used to monitor and control voltage for overvoltage and undervoltage protection, power-on reset, as well as power supply sequencing and fault detection. The TLC7703 is an ideal solution for safety-critical applications in automotive and consumer markets.

The specific data is subject to PDF, and the above content is for reference