TLP2366(TPL,E Isolators

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Number of Channels:	1
Inputs - Side 1/Side 2:	1/0
Voltage - Isolation:	3750Vrms
Common Mode Transient Immunity (Min):	20kV/µs
Input Type:	DC
Output Type:	Push-Pull, Totem Pole
Current - Output / Channel:	10mA
Data Rate:	20MBd
Propagation Delay tpLH / tpHL (Max):	40ns, 40ns
Rise / Fall Time (Typ):	15ns, 15ns
Voltage - Forward (Vf) (Typ):	1.61V
Current - DC Forward (If) (Max):	25mA
Voltage - Supply:	2.7 V ~ 5.5 V
Operating Temperature:	-40°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	6-SOIC (0.179", 4.55mm Width), 5 Leads
Supplier Device Package:	6-SO, 5 Lead

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components used to isolate one circuit from another, preventing any electrical interaction between the two circuits. The TLP2366 is an optoisolator that is classified under the Logic Output category. This type of optoisolator is typically used to provide logic signal isolation between systems that require different logic levels.The TLP2366 consists of an infrared diode, a phototransistor, and a feedback resistor. The infrared diode acts as a light sensor, and when activated, the phototransistor is triggered and produces an output signal. The output signal is isolated from the input signal, allowing the two circuits to work independently.The TLP2366 can be used in a variety of applications. It is commonly used in data systems and automotive electronic systems. In data systems, the TLP2366 can be used to isolate signals from a computer peripheral or I/O device and transmit them safely to a controller. In automotive systems, the optoisolator can be used to isolate signals, monitor vehicle speed, or control engine load.The working principle of the TLP2366 is fairly simple. When a logic input signal is applied to the optoisolator, the internal signal diode emits light, which is detected by the phototransistor. The transistor then amplifies the signal, producing an output that is isolated from the input. The output will be either a low or high signal, corresponding to the logic state of the input signal.In conclusion, the TLP2366 is a popular optoisolator that is used to provide logic signal isolation between two circuits. It consists of an infrared diode, a phototransistor, and a feedback resistor, and is used in data systems and automotive electronic systems. The working principle of the TLP2366 involves the emission of light from the internal diode, which is detected and amplified by the phototransistor, producing an output that is isolated from the input.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description