TLV5535IPW

Series:	--
Packaging:	Tube
Part Status:	Active
Number of Bits:	8
Sampling Rate (Per Second):	35M
Number of Inputs:	1
Input Type:	Single Ended
Data Interface:	Parallel
Configuration:	S/H-ADC
Ratio - S/H:ADC:	1:1
Number of A/D Converters:	1
Architecture:	Pipelined
Reference Type:	External, Internal
Voltage - Supply, Analog:	3 V ~ 3.6 V
Voltage - Supply, Digital:	3 V ~ 3.6 V
Features:	--
Operating Temperature:	-40°C ~ 85°C
Package / Case:	28-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	28-TSSOP
Base Part Number:	TLV5535

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)

The TLV5535IPW is an integrated circuit that is part of the Texas Instruments family of analog-to-digital (A/D) converters. These devices are used in a wide range of applications, from medical imaging devices to process control systems. In order to understand the TLV5535IPW, its field of application and its working principle must be understood.The TLV5535IPW is part of the TI\'s TLV family of products, which is a range of A/D converters that convert analog signals into digital codes. These devices are typically used wherever analog signals need to be measured and converted into digital codes, or vice versa. This includes areas such as medical imaging and process control systems. In these types of applications, the signal is typically measured very quickly and the output is used by the system to make decisions or to trigger other processes.The TLV5535IPW is a single-channel, 10-bit A/D converter. It is a low-power and low-cost device, designed for use in automotive and industrial applications. The device has a wide input range of 0V to 5V and a high signal-to-noise ratio (SNR) of 97 dB. The device also features an adjustable digital output voltage range, which can be set from 0V to 5V, and can be programmed to run from a single 5V supply. The device is also able to accept differential inputs and will work with various types of load capacitors.The working principle of the TLV5535IPW is based on the fact that analog signals can be converted into their digital counterparts. Analog signals are typically measured at high frequencies (usually higher than 1 MHz) and converted into digital signals using an analog-to-digital converter. The TLV5535IPW is a 10-bit A/D converter, which means it can convert an analog signal with a resolution of 10 bits into a digital signal.The TLV5535IPW is a low-power and low-cost device, designed to operate with a single 5V supply. It features a wide input range of 0V to 5V and a high SNR of 97 dB. It also features an adjustable digital output voltage range that can be set from 0V to 5V. The device also accepts differential inputs, so it can be used with various types of load capacitors. The device\'s output can be programmed to generate either binary or offset binary codes.The TLV5535IPW A/D converter is designed for a wide range of applications, from medical imaging to process control systems. It can be used to measure and convert analog signals into digital codes quickly and with a high resolution. With its adjustable digital output voltage range and wide input range, the device is suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description