TLZ10B-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLZ10B-GS08 is a single zener diode. It works by providing a low resistance path when forward-biased, and operated in reverse bias, the Zener diode maintains a relatively constant voltage between its terminals. It climbs above a predetermined breakdown voltage, effectively reducing the applied voltage.

The TLZ10B-GS08’s main purpose is to act as a voltage regulator. It is typically used to protect electronic components from high voltage spikes, or to increase the overall power supply voltage. It can also be used as a shunt in a load switch circuit, or in series output configurations for amplifying weak signals.

The TLZ10B-GS08\'s working principle is based on the fact that all diodes have an inverse relationship between current and voltage. As the voltage is increased, the diode current increases exponentially. When the voltage across the diode reaches a certain “breakdown” value, the current increases exponentially, creating a low-resistance path.

The breakdown voltage is also known as the zener voltage and it is one of the key parameters of a zener diode. The TLZ10B-GS08 has a zener voltage of 10V and a maximum reverse voltage rating of 8V. In addition to its zener voltage, the TLZ10B-GS08 also has a maximum power rating of 500mW and a reverse current rating of 1mA. These specifications make it suitable for many different applications, from signal conditioning to power regulation.

The TLZ10B-GS08 can be used in a variety of applications including overvoltage protection, voltage stabilizing and crowbar circuits. In overvoltage protection applications, the TLZ10B-GS08 is used to protect circuits from excessive voltage spikes. The zener voltage is selected to be slightly larger than the maximum normal operating voltage, so that when the voltage increases above the zener voltage, the diode will start conducting and limit the voltage to a safe value.

In voltage stabilizing applications, the TLZ10B-GS08 is used in conjunction with resistors to form a voltage divider circuit. In this configuration, the zener diode will regulate the output voltage to a value equal to the zener voltage. This is useful for providing a stable output voltage from an AC power supply or for combining multiple outputs into one.

Finally, the TLZ10B-GS08 can also be used as a crowbar circuit. In this configuration, the TLZ10B-GS08 is connected in series with a normally closed switch and a resistor. When the voltage exceeds the zener voltage, the diode will start conducting and the switch will open and short out the circuit, limiting the voltage and protecting components from damage.

In summary, the TLZ10B-GS08 is a single zener diode that can be used for a variety of applications. It works by providing a low resistance path when forward-biased, and when operated in reverse bias, the zener voltage maintains a relatively constant voltage between its terminals, effectively reducing the applied voltage. Its zener voltage, maximum power rating, and reverse current rating make it suitable for many applications ranging from signal conditioning to power regulation, overvoltage protection, voltage stabilizing, and crowbar protection.

The specific data is subject to PDF, and the above content is for reference