TLZ16B-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a kind of two-terminal electronic that has the capability to only allow current to move in one direction. One type of diode is the Zener Diode, which is a specially designed diode that permits current in the reverse direction when the voltage exceeds the breakdown voltage (or Zener voltage) of the diode. The TLZ16B-GS18 diode is a single Zener diode that is widely used in various applications.

TLZ16B-GS18 Application Field and Working Principle

The TLZ16B-GS18 is most often used in conjunction with integrated circuits, as a surge protector. It is also used in clamping circuits, as voltage regulators, as a voltage step-down device, or as a voltage reference circuit. By connecting the TLZ16B-GS18 in parallel with another diode, it is possible to use the diode for ESD protection or to be used in a TVS diode. In a clamping circuit, the TLZ16B-GS18 can be used as the lower diode of the pair, while the higher diode can be used to provide the desired voltage level.

The TLZ16B-GS18 is composed of a NPN transistor, which is used to form a conducting path. It has a reverse leakage current of 0.1mA and a reverse breakdown voltage of 18V. The breakdown voltage of the diode is that at which the depletion region of the diode has grown wide enough to allow a reverse current. If a voltage is applied to the diode which is higher than its breakdown voltage, the diode will become conducting.

The TLZ16B-GS18 is able to maintain a stable voltage over a wide range of current. This is due to its high voltage tolerance and low voltage drop module. In addition, it has a low power dissipation which allows it to be used in a variety of circuits. The diode is also relatively immune to electrical noise, making it a good choice for high-voltage switching applications.

When the reverse polarity of the diode is connected to an input voltage source, the voltage needs to be gradually increased until it reaches the breakdown voltage; only then will it become conducting. The voltage at this point is referred to as the Zener voltage and is typically between 15 and 40 volts. After the breakdown voltage is reached, the diode acts as a resistor, limiting the flow of current.

The TLZ16B-GS18 is also used in voltage regulation and voltage clamping circuits. In these applications, the diode is used in series and parallel with an associated fixed resistor, allowing them to provide the desired voltage output. The resistor helps to limit the amount of current, while the diode ensures that the voltage does not exceed a certain level.

The TLZ16B-GS18 diode is also often used for voltage reference circuits. In these circuits, a constant voltage, referred to as the Zener voltage, is maintained across the diode, regardless of the output voltage. This is useful for providing a stable reference voltage to other components, which allows them to operate at a constant voltage.

The TLZ16B-GS18 is a single Zener diode that is used in a variety of applications. It is composed of a NPN transistor and has a reverse breakdown voltage of 18V. The diode is able to maintain a stable voltage over a wide range of current and is immune to electrical noise. It is typically used in series and parallel with an associated fixed resistor, in order to provide a desired voltage output. It is also often used in clamping and reference voltage circuits, to provide a stable voltage to other components.

The specific data is subject to PDF, and the above content is for reference