TLZ16C-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLZ16C-GS08 is a single Zener diode. It allows current to pass in one direction only and is triggered by a specific reverse voltage. This component is typically used in voltage stabilization, current regulation, and signal clamping applications. It is commonly found in automotive, medical, industrial, and consumer electronics.

The TLZ16C-GS08 is a planar (surface-mounted) device with a package size of 2.6mm x 1.30mm (L x W) and has a maximum power dissipation of 500mW. It has a maximum forward voltage of 1.2V and a reverse leak current of 10uA. The maximum reverse breakdown voltage is 16V and the operating temperature range is -55C to +125C.

The working principle of the TLZ16C-GS08 is fairly simple. When the diode is connected to a circuit, it only allows current to flow in one direction. This is because the forward voltage of the diode prevents current from flowing in the opposite direction. When the voltage on the diode reaches the zener voltage, it will begin to conduct and allow current to flow in the opposite direction. This is known as breakdown voltage.

Using the TLZ16C-GS08 in voltage stabilization applications means that it is used to maintain a certain output voltage level, even when the input voltage fluctuates. It does this by allowing current to flow in the opposite direction when the input voltage exceeds the predetermined set point (the zener voltage). This reduces the output voltage and keeps it at the desired level.

The TLZ16C-GS08 can also be used in current regulation applications. This is done by connecting the diode in series with a current limiting resistor. When the current through the resistor reaches a certain level, the zener voltage will be reached and the diode will start to conduct. This reduces the current so that it remains at the desired value.

Finally, the TLZ16C-GS08 can be used as a signal clamping device. By connecting it in series with a signal line, it can be used to limit the amount of current that flows during a signal transduction. This not only protects the signal but also ensures that it remains within the required parameters.

The TLZ16C-GS08 single Zener diode is a versatile component which can be used in a variety of applications. It is often found in automotive, medical, industrial, and consumer electronics, as well as in voltage stabilization, current regulation, and signal clamping applications. Its working principle is based on allowing current to flow in one direction, and limiting current when the predetermined zener voltage is reached.

The specific data is subject to PDF, and the above content is for reference