TLZ13B-GS08

Series:	Automotive, AEC-Q101
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	13V
Tolerance:	--
Power - Max:	500mW
Impedance (Max) (Zzt):	14 Ohms
Current - Reverse Leakage @ Vr:	40nA @ 11.9V
Voltage - Forward (Vf) (Max) @ If:	1.5V @ 200mA
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Surface Mount
Package / Case:	DO-213AC, MINI-MELF, SOD-80
Supplier Device Package:	SOD-80 MiniMELF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TLZ13B-GS08 Application Field and Working Principle

Introduction:

TLZ13B-GS08 is a Zener diode, which belongs to the category of single diode components. It is a component that allows current flow in one direction while restricting current flow in the opposite direction. The TLZ13B-GS08 Zener diode is used in a variety of applications, such as signal switching, voltage regulation, voltage stabilization and signal reversal.

Application Field:

The TLZ13B-GS08 Zener Diode is an ideal component for signal switching, voltage regulation, voltage stabilization, and signal reversal. It is especially well-suited for low-voltage electronic circuits. In signal switching applications, the component is typically used as a switch between two circuits in order to prevent signal interference or isolate one portion of the system from another. The component can also be used in voltage regulation by allowing an adjustable voltage fluctuation between two points. This can be used to filter out spurious noise from a signal. The component can also be used in voltage stabilization, which maintains a steady voltage level in order to allow the circuit to operate at its maximum efficiency. Finally, the component can also be used in signal reversal applications, where it is used to reverse the polarities of a signal in order to make it more efficient.

Working Principle:

The working principle of the TLZ13B-GS08 Zener Diode can be explained by analyzing the structure of the component. It is composed of a diode and a Zener diode connected in series. The diode allows current to flow in one direction and the Zener diode allows current to flow in the reverse direction. In operation, when the voltage applied to the diode is higher than the breakdown voltage of the Zener diode, the current will be forced to flow in the reverse direction through the Zener diode. This reverse current flow is known as Zener breakdown. When the voltage applied to the diode is lower than the breakdown voltage, the current will be forced to flow in the forward direction through the diode. In simple terms, the working principle of the TLZ13B-GS08 Zener Diode can be explained as follows: it allows current to flow in one direction while blocking current flow in the reverse direction. This makes it an ideal component for voltage regulation, voltage stabilization, signal switching, and signal reversing applications.

Considerations:

When using the TLZ13B-GS08 Zener Diode, one should take into consideration the operating temperature, which should not exceed the recommended levels specified in the manufacturer’s datasheet. Furthermore, the voltage should never exceed the maximum allowed voltage of the component. Finally, the component should be handled with care in order to avoid any potential damage to the sensitive inner structure of the diode.

Conclusion:

In conclusion, the TLZ13B-GS08 Zener Diode is an ideal component for a variety of applications, such as signal switching, voltage regulation, voltage stabilization, and signal reversal. The component utilizes a diode and Zener diode connected in series, which allows current to flow in one direction and blocks current flow in the reverse direction. When using this component, the operating temperature must not be exceeded and the voltage should not exceed the maximum allowed voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description