TZMB6V8-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TZMB6V8-GS18 is a single Zener diode, specifically a 7.0V, 500mW diode. It is part of a wide range of overvoltage protection diodes known for their high reliability, low leakage current, and low clamping voltage. The TZMB6V8-GS18 is part of a family of Zener diodes that are suitable for a variety of applications, ranging from power supplies to automotive electronics. The TZMB6V8-GS18 can be used in a number of ways, depending upon the desired results.

Applications

In short, the TZMB6V8-GS18 is used to protect against overvoltage and surges, and as a voltage limiter in all types of electronic systems, including automotive electronics, industrial electronics, communication electronics, and power supplies. It can be used in a variety of high-voltage circuits to provide protection against over-voltage and high-voltage transients. It is also used in applications such as data transmission and signal conditioning. In these applications, it helps protect against the damaging effects of over-voltage and clip the signal level to within an acceptable range.

Working principle

The TZMB6V8-GS18 is a Zener diode, which is a type of diode that has a built-in breakdown voltage. When the diode’s reverse-bias (negative) voltage is greater than the breakdown voltage, the diode enters a state of avalanche breakdown and conducts current in the reverse direction. The breakdown voltage of the diode is determined by the properties of its semiconductor, which vary by type. The TZMB6V8-GS18 is a 7.0V 500mW Zener diode. This means that when a negative voltage greater than 7.0V is applied to the diode, it will enter the breakdown state and start conducting current in the reverse-bias direction.

In operation, the TZMB6V8-GS18 is used to help protect an electronic circuit from over-voltage and surge damage. When the reverse bias voltage rises above the diode’s breakdown voltage, the diode will begin conducting and will help to prevent the voltage across the circuit from rising above the breakdown voltage. The current that the diode is able to conduct is limited, so it can only absorb so much energy before it is damaged. However, it is typically able to absorb enough energy to prevent damage to the electronic circuit.

The TZMB6V8-GS18 is also used as a voltage limiter in some applications. In this case, the diode is connected in a manner such that it allows current to flow in one direction but not in the other. This allows the voltage across the circuit to be limited to the diode’s breakdown voltage. This is useful in applications such as signal conditioning or data transmission where the input signal needs to be limited to a certain voltage level.

Advantages

One of the main advantages of the TZMB6V8-GS18 is that it is able to provide reliable over-voltage protection while still providing performance and cost-effectiveness. The reverse-bias breakdown voltage of the TZMB6V8-GS18 is set at 7.0V, which is enough to protect against most surges and over-voltage events. Additionally, the diode is able to conduct current with low leakage, making it ideal for use in applications sensitive to current leakage.

The diode’s small size and low cost make it attractive for use in a variety of applications. It is small enough to fit in tight spaces, and its low cost means it can be used in large numbers without breaking the bank. This makes it suitable for use in many consumer electronic products and industrial environments.

Conclusion

The TZMB6V8-GS18 is a single Zener diode that is commonly used for over-voltage protection and voltage limiting applications. It is highly reliable, has low leakage current, and can handle high voltages. It is also small and inexpensive, making it suitable for use in a variety of applications. Its ability to provide reliable protection and its cost-effectiveness make it the ideal choice for many electronic designs.

The specific data is subject to PDF, and the above content is for reference