TZQ5251B-GS08

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of electronic component with two electrodes, a cathode and an anode, that allows a current to flow in one direction, but not the other. Zener diodes are a type of diode with a breakdown voltage that causes it to conduct in the reverse direction when the voltage between the electrodes reaches the breakdown voltage. A single Zener diode, such as the TZQ5251B-GS08, is a semiconductor device that physically contains a single Zener diode. In this article, we will discuss the application fields of the TZQ5251B-GS08 and its working principle.

The TZQ5251B-GS08 can be found in a variety of applications, from power supplies to protection circuits. In a power supply, it is often used as a reverse-biased Zener diode, providing a constant voltage output. This is done by connecting the anode of the diode to the positive voltage side of the circuit, and the cathode to the positive voltage side. When the voltage on the anode of the diode exceeds the breakdown voltage of the diode, the diode will begin to allow current to flow in the reverse direction. This current is known as Zener current, and by sensing this current, a power supply can maintain a constant output voltage.

The TZQ5251B-GS08 can also be used in protection circuits. These circuits are designed to protect sensitive electronics from damage due to overvoltage or reverse biases that could otherwise cause malfunction or even permanent damage. By connecting the diode in series with the device to be protected, the reverse bias voltage can be clamped to a safe level by the Zener diode. This is done by connecting the cathode of the diode to the voltage source and the anode of the diode to the device; this will prevent any excessive reverse bias from damaging the device.

The TZQ5251B-GS08 can also be used in voltage multiplier circuits. These circuits are used to step up low voltage input signals, such as from an oscillator, to higher voltage levels for powering other components or to produce higher frequency intervals. By connecting a series of Zener diodes to the input signal, the voltage of the input signal is multiplied.

The TZQ5251B-GS08 has a breakdown voltage of 8V, meaning that when the voltage between its anode and cathode reaches 8V, it will begin to conduct in the reverse direction. Its maximum power rating is 500mW, meaning that it can dissipate up to 500mW of power before it will overheat and be damaged. It also has a maximum reverse leakage current of 5mA, which is the amount of current that will flow in the diode when it is reverse biased.

In conclusion, the TZQ5251B-GS08 is a single Zener diode with a breakdown voltage of 8V, a maximum power rating of 500mW, and a maximum reverse leakage current of 5mA. It can be used in a variety of applications, from protection circuits to power supplies and voltage multipliers. By understanding its working principle, it can be used to provide protection from reverse bias and overvoltage, and to provide a constant voltage output for powering other components.

The specific data is subject to PDF, and the above content is for reference