UBC1C102MNS1ZD

Ratings:	--
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.673" L x 0.673" W (17.10mm x 17.10mm)
Height - Seated (Max):	0.689" (17.50mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	--
Ripple Current @ High Frequency:	850mA @ 100kHz
Ripple Current @ Low Frequency:	569.5mA @ 120Hz
Applications:	Automotive
Series:	UBC
Polarization:	Polar
Operating Temperature:	-55°C ~ 150°C
Lifetime @ Temp.:	1000 Hrs @ 150°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	1000µF
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors (AECs) are one of the most common types of capacitors. AECs are polarized capacitors whose capacitance value depends on the size of the plates, the material between the plates, and the type of electrolyte used in the device. AECs are mainly used for applications requiring high capacitance values for relatively large area devices such as main power supplies, bridge rectifier filters, DC-DC converters, low dropout regulators, and power factor correction circuits.

UBC1C102MNS1ZD Application Field and Working Principle of Aluminum Electrolytic Capacitors

UBC1C102MNS1ZD is an aluminum electrolytic capacitor with an operating temperature range from -40°C to 85°C and a capacitance of 1000 μF with 5.0V of rated voltage. This capacitor type is mainly used for low frequency and low loss applications such as power supplies, automotive power systems, consumer electronics, and other general purpose applications.Aluminum electrolytic capacitors are non-polarized capacitors that use a combination of a very thin oxide layer on an aluminum anode and a liquid or solid electrolyte to allow large capacitances in a very small volume. The thin oxide layer acts as the dielectric, while the electrolyte acts as the charge carrier. When a voltage is applied across the plates, the oxide layer is polarized, and charges move between the plates through the electrolyte, creating a charge separation that increases the capacitance. The characteristics of the oxide layer and the electrolyte determine the voltage rating, ESR, and other important parameters of the capacitor.The oxide layer is formed during the manufacturing process by anodizing the surface of a rolled aluminum foil, which produces a porous oxide layer that is then filled with the electrolyte. The anodizing process can be done using either a low voltage electro-chemical process or a higher voltage wet chemical process. The thickness of the oxide layer and the material used in the electrolyte both determine the voltage rating of the device.The ESR (equivalent series resistance) of the UBC1C102MNS1ZD is 0.130ohm, and the rated ripple current at 100kHz is 270mA. This type of capacitor has superior temperature stability, allowing it to be used over wide operating temperature ranges. The capacitance stability is also excellent, and the capacitance does not decrease significantly at high temperatures and frequencies.

Conclusion

Aluminum electrolytic capacitors are widely used in many applications due to their high capacitance values and low losses. The UBC1C102MNS1ZD is a high quality and reliable capacitor type that is suitable for a variety of applications, such as power supplies, automotive power systems, consumer electronics, and other general purpose applications. It has a very low ESR and excellent temperature and capacitance stability, making it a reliable option for these types of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description