UCC27324P

Logic Voltage - VIL, VIH:	1V, 2V
Base Part Number:	UCC27324
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 150°C (TJ)
Rise / Fall Time (Typ):	20ns, 15ns
Input Type:	Non-Inverting
Current - Peak Output (Source, Sink):	4A, 4A
Series:	--
Voltage - Supply:	4.5 V ~ 15 V
Gate Type:	N-Channel, P-Channel MOSFET
Number of Drivers:	2
Channel Type:	Independent
Driven Configuration:	Low-Side
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Gate DriversThe UCC27324P is a protected gate driver integrated circuit (IC), which is used to control the switch behavior of output circuits such as transistors, IGBTs, and thyristors. It is designed to give a high level of protection to the gate drive circuit, while providing a reliable drive signal to the gate of the active device.The UCC27324P is a dual-channel gate driver with independent inputs and outputs, meaning it can be used to drive two separate gate signals at the same time. It is also designed to protect both its inputs and outputs from electrical overstress. This is done by a protection circuit which detects excessive voltage, current or temperature and shut down the output drivers until the fault has been resolved.The UCC27324P driver is based on a buck-boost topology, which means it will step-up or step-down the input signal to the required level for the output device. This is done using a combination of a power MOSFET and a PWM controller which switches the MOSFET on and off at a predetermined frequency.The UCC27324P offers several operating modes including latched, non-latched, and burst mode. This means it can be configured to suit the specific requirements of each application. For example, if fast response times are needed, the burst mode can be used to reduce the dead time of the output drivers. In addition, the UCC27324P features built-in overvoltage protection, undervoltage protection, current limiting, and overtemperature protection, making it suitable for a range of applications.The UCC27324P is widely used in applications such as motor control, robotics, industrial automation, and process control. It is also popular in automotive applications, such as fuel injectors, airbag systems, ignition systems, and battery charging systems.This IC is also suitable for use in renewable energy applications, such as solar and wind energy systems. In these applications, it can provide reliable gate drive for power converters and inverters. Due to its protection features, the UCC27324P is well-suited for harsh environments, where it can ensure the safety of power devices while providing reliable operation. This IC is also capable of controlling high-power devices such as transistors, IGBTs, MOSFETs, and thyristors in series.All in all, the UCC27324P is an advanced gate driver IC, which offers a high level of protection and reliable operation, making it suitable for a variety of applications in a range of environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description