UCC27524A1QDGNRQ1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuit (PMIC) gate drivers are used to switch on and off an electrical device, such as a transistor. They are used in various applications, such as automotive, consumer electronics, industrial, and power management applications. The UCC27524A1QDGNRQ1 is a high-side N-channel power MOSFET switching gate driver that is designed to drive a large number of power transistors quickly and reliably.

The UCC27524A1QDGNRQ1 gate driver is used in applications that require high-speed switching, high-current drive capability, and low-voltage operation. It can be used in automotive lighting systems, DC-DC converters, LED lighting systems, HVAC systems, uninterruptible power supplies (UPSs) systems, or any other application where there is a need for fast and reliable switching.

The main feature of the UCC27524A1QDGNRQ1 gate driver is that it is designed to drive high-current loads with high switching speeds and low power losses. The device has a low-voltage operating range of 3 V to 36 V and a maximum gate charge of 49nC for a 5 V supply. The device can handle a maximum peak-output current of 1 A and a continuous gate drive current of 0.3 A. It also has a frequency response up to 10 kHz and a maximum propagation time of 1.2 microseconds.

One of the key features of the UCC27524A1QDGNRQ1 gate driver is its ability to drive high-current loads while dissipating low power losses. The device features a low-voltage sinking circuit, which helps reduce power consumption. Furthermore, the device includes an integrated level shifter that allows it to drive loads of different voltages. Lastly, the device also has a built-in over-current protection circuitry, which helps prevent overload damage to the MOSFET in case of short-circuits.

The working principle of the UCC27524A1QDGNRQ1 gate driver is based on a voltage-controlled switch circuit. The device consists of two MOSFETs, which are connected in parallel. These two MOSFETs are driven by a P-channel gate driver. The gate driver is activated by a logic signal, which is supplied to the device’s control pin. When the logic signal is applied, the gate driver will cause one of the MOSFETs to turn ON, while the other MOSFET is turned OFF. The voltage applied to the control pin determines which MOSFET will be turned on and which MOSFET will be turned off.

The UCC27524A1QDGNRQ1 gate driver is suitable for use in a variety of applications, such as automotive lighting systems, DC-DC converters, LED lighting systems, HVAC systems, and uninterruptible power supplies (UPSs) systems. It features low power losses, high-speed switching, and a wide operating voltage range. It is also equipped with an integrated level shifter and an over-current protection circuitry, making it a reliable and efficient device for switching power transistors.

The specific data is subject to PDF, and the above content is for reference