ULN2804APG,N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ULN2804APG,N Application Field and Working Principle

The ULN2804APG,N is a high-voltage, high-current Darlington transistor array with a base consisting of eight NPN Darlington pairs. It is a “neg” part, meaning it was designed for use with a negative logic input control system. It is used to interface logic outputs from TTL, DTL, and CMOS logic with a variety of loads such as relays, solenoids, and motors, and is capable of sourcing 500 mA per channel and peak currents up to 600 mA. It can also provide load protection, as the voltage drop on each Darlington pair is approximately 1.2V.

Applications of ULN2804APG,N

The ULN2804APG,N is commonly used for its ability to switch large loads from a low logic level. This makes it suitable for a number of logic interfacing applications, such as for driving stepper motors, relay coils, and lamps. It can also be used in buffering, level shifting, and logic interfacing applications, providing high-voltage pull-up, pull-down, and totem-pole drive capability. It is also used in parallel circuits with motors, solenoids, and lamps due to its ability to provide 500 milliamperes of load current.

How Does ULN2804APG,N Work?

The ULN2804APG,N is comprised of eight NPN Darlington pairs, with each of the eight pairs being assigned to a respective input channel. When a logic level high voltage is applied to the appropriate channel, current will flow through the protection diode and into the base of the Darlington pair. This current then causes the collector-base junction to become forward biased, further increasing the current flow into the collector, and allowing the output load to be activated. To deactivate the load, the logic level high voltage applied to the appropriate channel must be removed. Total power dissipation of the device should not exceed 1 watt.

Benefits of ULN2804APG,N

The ULN2804APG,N is useful for low-level current control applications requiring large loads. Its Darlington transistor design allows for a higher voltage and current gain than single transistors. In addition, its ability to provide a low logic level high current makes it suitable for a number of logic interfacing applications. Finally, it is also POWERFUL, meaning that it is capable of handling large capacitive loads, and can provide up to 600 milliamperes of peak current.

Conclusion

The ULN2804APG,N is a Darlington transistor array with a base consisting of eight NPN Darlington pairs. It is used to interface logic outputs from TTL, DTL, and CMOS logic with a variety of loads, and is capable of sourcing 500 mA per channel and peak currents up to 600 mA. It is commonly used for its ability to switch large loads from a low logic level, and is useful for low-level current control applications requiring large loads. The ULN2804APG,N can be used in buffering, level shifting, and logic interfacing applications, and its total power dissipation should not exceed 1 watt.

The specific data is subject to PDF, and the above content is for reference