1N4507

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1N4507 is a single-phase silicon rectifier diode typically used in power supplies and other rectification applications. It is a commonly used type of power diode and will handle currents up to 1A, voltages up to 1000V, and is rated for surge currents up to 30A. The 1N4507 is typically rated for an average, repetitive forward current of 0.5A, however, this may vary depending on the manufacturer of the device.

The 1N4507 has been around for many years, so it can often be found in many older electronics, as well as newer devices. It is a relatively inexpensive component, so can often be found in circuit designs for budget or cost-sensitive applications. The device is usually mounted directly to the board in either a DO-201AD or DO-41 package. The maximum junction temperature is typically 150°C.

The 1N4507 breaks down into two main sections: the anode and the cathode. The anode is connected to the positive power supply voltage and the cathode is connected either to ground or a negative potential. The device operates by allowing current to flow through the junction when the correct bias is applied. The diode has a high resistance to reverse current, and the amount of resistance is known as the reverse breakdown voltage.

In practice, the 1N4507 diode is used in circuits that require full wave rectification, such as power supplies, as well as for circuit protection against over-voltage and short circuits. The reverse breakdown voltage of the 1N4507 provides protection against minor over-voltage encounters. It is also used to perform peak-to-peak conversion for AC signals, as well as for full-wave voltage doubler circuits, which provide double the output voltage of a given input voltage.

In a basic power supply circuit, the 1N4507 diode is typically connected across two input power sources, with the anode connected to the positive terminal and the cathode connected to the negative terminal. As the input power switches between the two sources, the diode quickly responds by blocking current flow in one direction and allowing it to flow in the other direction. This ensures that the output voltage of the power supply follows the same pattern, producing AC rectified DC power.

The 1N4507 diode is also commonly used in AC to DC conversion circuits, as well as in other applications, such as full-wave current control, snubber circuits, and clamping circuits. It is also used in relay circuits, voltage multipliers, and switch-mode power supplies. It is a versatile component and can be used in a variety of circuit designs, which makes it a popular choice for many engineers.

The specific data is subject to PDF, and the above content is for reference