2SB0710ARL

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Transistor Type:	PNP
Current - Collector (Ic) (Max):	500mA
Voltage - Collector Emitter Breakdown (Max):	50V
Vce Saturation (Max) @ Ib, Ic:	600mV @ 30mA, 300mA
Current - Collector Cutoff (Max):	100nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	120 @ 150mA, 10V
Power - Max:	200mW
Frequency - Transition:	200MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-236-3, SC-59, SOT-23-3
Supplier Device Package:	Mini3-G1
Base Part Number:	2SB0710

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 2SB0710ARL is a member of a transistor family known as bipolar junction transistors (BJT). Specifically, it is a single BJT. As such, it is a three-terminal semiconductor device made up of two p-n junctions connected together. This type of transistor can be used to amplify, switch, regulate and in other applications.

The 2SB0710ARL can be used in a variety of applications, such as amplifier circuits, switching circuits, and in power supplies. It is well-suited to linear amplifiers in both low noise and general purpose circuit configurations. Its low noise characteristics make it a good choice for circuits where noise must be minimized. It also works well in circuits where high gain is necessary.

In any circuit containing a transistor, the device\'s performance is characterized by its gain. The gain of a BJT is measured in terms of the ratio of the collector current to the base current. This relationship is governed by the transistor\'s current gain, which is usually expressed as hFE.

The 2SB0710ARL has a fairly high gain, which makes it well-suited for amplifier and switching applications. The gain is also easily adjustable, making the device an attractive choice for certain applications. It also features low saturation voltage and can handle high frequency signals.

One of the most important characteristics of a transistor is its switching speed, or how quickly it can be turned on or off. The 2SB0710ARL has a fast switching speed and is well-suited to switching circuits. It can switch signals in the frequency range of up to 150kHz.

At its core, the 2SB0710ARL works by using the flow of electrons between the base and collector terminals. When a voltage is applied to the base, it causes a current to flow from the base to the collector. The amount of current that flows is determined by the transistor\'s current gain. This current is then used to control a larger current passing from the emitter to the collector.

The 2SB0710ARL is an excellent choice for a wide range of BJT applications, especially switching and amplifying. It offers good performance, iseasy to use, and is relatively inexpensive. With its adjustable gain, fast switching speed, and low saturation voltage, it is well suited to both commercial and industrial applications, making it one of the most popular BJT devices available today.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description