2SC3648T-TD-E Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

2SC3648T-TD-E is a device of a single bipolar junction transistor (BJT) type. This device is most commonly employed in circuit applications such as amplifying existing signals or switching between input and output circuits.

A BJT is a type of transistor which allows current flow through two regions or junctions of a semiconductor material when a voltage is applied. The two regions form an N-type and P-type semiconductor layer, producing an electric field which causes the current from one region to the other. When the base-to-emitter voltage is increased beyond 0.6V, a significant amount of current flow occurs. This voltage is known as the cutoff voltage.

2SC3648T-TD-E operates with a minimum cutoff voltage of 4V. It has a maximum continuous collector current of 80 mA, with a maximum peak collector current of 200 mA. This transistor has a maximum collector-base voltage of 75V. The maximum collector-emitter voltage as well as the emitter-base voltage is 30V. This device comes in an SOT-523 package which measures 4.9mm x 4.9mm x 1.6mm.

2SC3648T-TD-E can be used in various applications such as amplifiers, relays and power management. These transistors are used in relays because the device can be switched on and off at very high speeds. This is useful for controlling motors or other power intensive devices. This transistor can also be used in digital logic applications, to reduce electrical noise or to provide voltage or current amplification.

In amplifiers, 2SC3648T-TD-E is used to provide voltage gain. The input voltage is multiplied by the transistor’s current amplification factor, resulting in an amplified output voltage. This device can also be used in power management systems, to regulate the power output of a power supply, or to reduce electrical noise.

2SC3648T-TD-E is also used in analog-to-digital converters, to convert analog signals into digital signals. This is done by controlling the current flow through the transistor, which switches between two stable states. The output of the transistor depends on the input voltage, with the transistor switching to a low voltage when the input is low and a high voltage when the input is high. This switching process is used to convert the analog signal to a digital form.

2SC3648T-TD-E has various applications that integrate these integrated circuits into various settings. These may include but are not limited to industrial automation, lighting, audio, medical and communication systems. Other applications may include automotive devices, consumer electronics and power control applications.

The specific data is subject to PDF, and the above content is for reference