ACST12-7ST

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A TRIAC, short for Triode for Alternating Current, is a type of thyristor, which is a type of four-layer semiconductor device. A TRIAC is made up of three terminals, the Gate terminal, the MT1 terminal, and the MT2 terminal. TRIACs are used in many applications ranging from the control of small AC appliances to very high-power AC motor drives.

The ACST12-7ST is a TRIAC used in high-power applications like large AC motor drives and industrial heating. It is rated for up to 12 amps and has a peak off-state voltage of 7,000 volts. The ACST12-7ST is a very popular TRIAC, due to its high current and voltage ratings which allow it to be used in a wide variety of applications.

The main application of the ACST12-7ST is in the control of AC machines such as motors and transformers. It is also used in electric heaters and other AC-powered appliances. It works by acting as a switch which can be opened or closed by applying or removing a voltage to its Gate terminal. When the Gate voltage is zero, the TRIAC is off and does not allow any current to flow through the device. If a voltage is applied to the Gate then the device turns on and becomes a low impedance switch that allows current to flow between the MT1 and MT2 terminals.

The working principle of the ACST12-7ST is based on the PNPN semiconductor switching effect. It consists of three distinct layers of PN junction diodes; the anode, cathode, and gate terminal. The two end diodes are connected to the MT1 and MT2 terminals and the third diode is connected to the Gate terminal. When a Gate voltage is applied, current flows from the anode to the gate and then from the gate to the cathode. This action allows current to flow from MT1 to MT2 and thus it acts as a switch.

In summary, the ACST12-7ST is a popular TRIAC used in many high-power applications such as AC motor drives, heaters and other AC loads. It is rated for up to 12 amps and a peak off-state voltage of 7,000 volts. Its main working principle is based on the PNPN semiconductor switching effect wherein a gate voltage applied to the TRIAC allows current to flow from MT1 to MT2.

The specific data is subject to PDF, and the above content is for reference