ACST1635-8FP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are a class of semiconductor devices which act as a switch in digital circuits. They possess two terminals, an anode and a cathode, and usually trigger when the voltage across the anode exceeds the threshold voltage or when the anode-cathode current exceeds the threshold current. Thyristors are used in a variety of applications, from the control of simple for-loop inductor and motor operations to the generation of complex control signals. The ACST1635-8FP is one type of thyristor, known as a TRIAC, and is used for general purpose switching, such as lamp dimmer controls, motor speed control and phase control. A TRIAC is a thyristor with three terminals, an anode, a cathode and a gate, which are used to control the amount of current flowing between the anode and cathode.

The ACST1635-8FP works by using two SCRs, connected in an inverse parallel configuration. This has the effect of drastically reducing the on-state voltage drop of the thyristor, while also providing an increased immunity to both inductive and capacitive circuit components. This makes the ACST1635-8FP ideal for applications requiring a low on-state drop, such as lamp, motor and phase control.

The way the ACST1635-8FP works is similar to that of a bistable switch. When the gate terminal receives a positive pulse, the thyristor begins to conduct and continues conducting until the voltage or current between the anode and cathode drops below a threshold level. This will depend on the type of circuit the ACST1635-8FP is used in but is typically around 0.2V. This means that the ACST1635-8FP can act as a switch and provide excellent performance, while still being very energy efficient.

The gate terminal is used to control the current flow between the anode and cathode. When the gate terminal is at a negative voltage, the SCRs are in the reverse-biased mode, and the thyristor does not conduct. When the gate terminal is at a positive voltage, the SCRs will become forward-biased, and the thyristor will become conducting, allowing current to flow from the anode to the cathode. This allows for precise control of the current flow, and can be used to modulate the intensity of a lamp, control the speed of a motor, or to provide phase control of an inductive load.

In conclusion, the ACST1635-8FP TRIAC is an ideal choice for applications requiring a low on-state voltage drop, good immunity from inductive and capacitive circuits, and precise control of current flow. It is a highly energy efficient solution which can be used in a variety of applications including lamp dimmer controls, motor speed control and phase control.

The specific data is subject to PDF, and the above content is for reference