ACST6-7SR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are devices used to control and regulate electric current in an efficient manner. Among these, TRIACs are Semiconductor switches that have three electrodes (G1, A1, and A2) and are used to amplify and regulate the current. TRIACs have been used in digital control systems, as they have a low resistance and can operate at relatively high frequency. Thyristors are also ideal for switching low voltage signals, as they can handle large power ratings and have low hysteresis.

The ACST6-7SR is a type of TRIAC which is characterized by its fast turning on and off speed and high off-state current leakage. The ACST6-7SR is particularly suitable for use in medium and low power applications such as lighting and motor control. It is a surface-mountable device with a high power rating, allowing for its use in higher power applications than for other TRIACs.

The ACST6-7SR has a unique structure where a conventional 2-terminal TRIAC is coupled with two low resistance, back-to-back connected diodes such as Si or Ge. The back-to-back diodes, which have a low turn-on and turn-off time, provide faster switching speeds and lower power consumption than a conventional TRIAC which has a higher turn-on and turn-off time.

The ACST6-7SR is a latching TRIAC with a turn-on voltage of 5V, a turn-off voltage of 7V and an on resistance of 5Ω. It also has a low on-state voltage drop with a typical value of 0.6V. The ACST6-7SR is also rated to handle a continuous forward current of 6A and has a blocking voltage of 800V, making it suitable for medium and low power applications such as industrial motor control and lighting.

The applications for the ACST6-7SR can include industrial motor control, lighting control, temperature control, and domestic appliance control. The TRIAC is suitable for use in applications where switching of loads is required at an AC voltage. The ACST6-7SR can be used to switch loads from low to medium power levels such as motor control in domestic appliances and motor starters in industrial settings.

The ACST6-7SR also makes a very cost-effective switch solution in medium power applications, as it is a relatively inexpensive device. The device has a low hysteresis, meaning that it can be used in the switching applications that require accurate voltage and current control.

The working principle of the ACST6-7SR is based on the same principle of a conventional TRIAC. The device consists of three terminals, with the two gate terminals connected to the control circuit and the main terminal connected to the load. When the control voltage is applied to the gate terminals, an electric field is generated between the gate and the main terminal which creates an inversion of the p-type layer and induces a current flow from gate to main. When the AC voltage reaches the breakdown voltage the current then passes in the reverse direction, allowing for the TRIAC to switch on and off.

The ACST6-7SR is a high power TRIAC and therefore is connected in series with a gate resistor to control the current through the gate. The gate resistor is used to reduce the current flowing through the gate terminal and to prevent uncontrolled current flow. The gate voltage is then adjusted to determine the conduction of the TRIAC.

In conclusion, the ACST6-7SR is a type of TRIAC which is well suited for medium and low power applications such as lighting and motor control. The ACST6-7SR is relatively inexpensive and can handle a continuous forward current of 6A with a blocking voltage of 800V, enabling its use in medium power applications. The device also has a low off-state current leakage and a low turn-on and turn-off time, providing efficient and stable switching.

The specific data is subject to PDF, and the above content is for reference