ACST410-8B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs (Triode for Alternating Current) are solid-state devices that are used for switching and controlling AC electric current. ACST410-8B is a special type of TRIACs developed by Norcomp, a leading manufacturer in the electronics industry. It is a large-current, low-power dissipative component that is mainly used in industrial applications, such as electric welding and motor control.

The ACST410-8B is a three-terminal device whose terminals are labeled as G (Gate), MT1 (Main Terminal 1) and MT2 (Main Terminal 2). The external electric circuit is connected to these terminals so that it can be used to control electric current flow. When the gate of the ACST410-8B is ‘on’, current can flow between the main terminals, and when the gate is ‘off’, current cannot flow through the device. This ‘on/off’ switching behavior is what makes the ACST410-8B suitable for controlling current flow.

The ACST410-8B consists of two back-to-back thyristors or SCRs (silicon-controlled rectifier) internally connected between its main terminals. It uses a phase-control operation technique known as Phase-Firing which allows the phase-delay of the SCRs to be adjusted from full-on (zero phase delay) to full-off (maximum phase delay). This means that the ACST410-8B can be used to control the start and stop of electric current flow as well as the amount of current flow. The device also has an open emitter feature which allows controlled overcurrent to pass through without damaging the device.

The ACST410-8B is mainly used in applications that require high efficiency and low power consumption. It is widely used in welding applications to control welding arcs, and in motor driven systems to control motors. It can also be used in AC power dimming applications where it acts as a switch to regulate the amount of current being supplied to the load. The ACST410-8B is available in a range of voltage and current ratings, so it is suitable for use in many different applications.

The ACST410-8B is a reliable device that provides reliable performance in a variety of industrial applications. It can be easily mounted on a circuit board and connected to other components, making it an ideal choice for controlling power in applications such as welding and motor control. The device also offers a high degree of safety as it is designed to turn off automatically in the event of an overload or short circuit.

The specific data is subject to PDF, and the above content is for reference