ADG511BRZ

Switch Time (Ton, Toff) (Max):	200ns, 120ns (Typ)
Base Part Number:	ADG511
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	-85dB @ 1MHz
Current - Leakage (IS(off)) (Max):	100pA
Channel Capacitance (CS(off), CD(off)):	9pF, 9pF
Charge Injection:	11pC
-3db Bandwidth:	--
Series:	--
Voltage - Supply, Dual (V±):	±4.5 V ~ 5.5 V
Voltage - Supply, Single (V+):	3 V ~ 5.5 V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	30 Ohm (Typ)
Number of Circuits:	4
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NC
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADG511BRZ is a quad single-pole/double-throw (SPDT) analog switch device suitable for use in many applications in communications, test and measure, and data acquisition systems. With an oxide-isolated integrated-circuit (IC) process, this device contains four independent, single-pole/double-throw switches. The switch is capable of switching supplies up to ±15 V.The ADG511BRZ offers excellent on-resistance matching over the specified temperature range and low on-resistance flatness. Additionally, the temperature coefficient of on-resistance is also very low for most applications. The on-off ratio of this device is the ratio of the signal provided at the common of the switch when it is turned on minus when it is turned off. The typical on-off ratio is 40 dB and the maximum leakage is very small.This device is an analog multiplexer/demultiplexer. It has four channels, which are switched by an enable signal. When the enable signal is low, all of the switches are closed and when it is high, the individual switches can be opened or closed as desired. The ADG511BRZ has a typical data sheet on-off ratio of 40 dB and low leakage of -70 dB. It is ideal for use in data acquisition systems and for multiplexing signals into a single channel.The working principle of the ADG511BRZ is based on a two-stage architecture. It has two switches in each stage which are controlled by two control signals. The control signals are connected to a logic device which generates the enable signal. The logic device then uses the enable signal to control the two switches in each stage thus creating either a single-pole/single-throw (SPST) switch or a single-pole/double-throw (SPDT) switch. The SPST switch is used to connect two signals while the SPDT switch is used to disconnect a signal from one device and connect it to another.The ADG511BRZ is suitable for a wide variety of applications. It can be used to switch high speed signals, analog signals and digital signals. It is also used in data acquisition systems and is well suited for switched capacitor filters and other sensitive applications. It is also used in power distribution systems and RF signal routing applications.In summary, ADG511BRZ is an analog switch device suitable for applications in communications, test and measure, and data acquisition systems. It is based on a two-stage architecture, which uses two switches in each stage and is controlled by two control signals. With an oxide-isolated integrated-circuit (IC) process, this device contains four independent, single-pole/double-throw switches. The switch is capable of switching supplies up to ±15 V and is capable of very low on-resistance and on-off ratio matching. It is also well suited for switched capacitor filters and other sensitive applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description