ADP172ACBZ-3.0-R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADP172ACBZ-3.0-R7 is a three-terminal low dropout linear regulator (LDO) integrated circuit (IC). This device is suitable for applications in which input voltages that are slightly higher than the desired regulated output voltage are available. The useful range of the ADP172ACBZ-3.0-R7 is from 1.8V to 28V, with a maximum output current of 200mA. The ADP172ACBZ-3.0-R7 provides fast transient response times and low quiescent current to ensure high performance in a variety of applications.

This device is designed for applications such as switching supplies, regulation of negative and positive voltages, and secondary regulated supplies. It can also be used to regulate low power and low noise analog and digital circuits, such as those found in intermediate bus converters, battery and power management systems, power converters, and LED lighting.

The ADP172ACBZ-3.0-R7 has two main features: low drop-out voltage and low quiescent current. The low drop-out voltage is the difference between the input and the output voltages. This device has a drop-out voltage of 2mV at 200mA, allowing it to regulate output voltages that are close to the input voltage with high efficiency. The low quiescent current of 2.3µA increases the battery life in applications using a battery as the power source.

The ADP172ACBZ-3.0-R7 is designed to be protected against short-circuit, over-voltage, and over-temperature. It also has an enable logic pin which can be used to control the enable/disable state of the device. The enable logic has an open-drain logic and input voltage range that is compatible with common logic families. This allows the device to be integrated into selecting circuits. The device also has a shutdown pin which can be used to power off the device when it is not in use.

The ADP172ACBZ-3.0-R7 has an output voltage accuracy of ±0.8% and a fast response time with minimum output voltage overshoot. The device is set to the desired voltage using an external resistor divider network and the output voltage is maintained even with a significant change in temperature. The device also has an adjustable current limit, allowing the maximum current through the device to be adjusted as needed.

The ADP172ACBZ-3.0-R7 also features ESD protection. It includes an ESD diode with an on-chip clamping diode which limits the peak voltage to the absolute maximum rating. The ESD diode also allows the device to take a transient hit from electrostatic discharge, thus protecting the other components in the system.

In summary, the ADP172ACBZ-3.0-R7 is a three-terminal low dropout linear regulator suitable for a variety of applications ranging from switching supplies, voltage regulation, and secondary regulated supplies. This device offers low drop-out voltage, low quiescent current, precision output voltage regulation, an adjustable current limit, and ESD protection.

The specific data is subject to PDF, and the above content is for reference