Allicdata Part #: | 785-1707-2-ND |
Manufacturer Part#: |
AOD9T40P |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Alpha & Omega Semiconductor Inc. |
Short Description: | MOSFET N-CH |
More Detail: | N-Channel 400V 6.6A (Tc) 83W (Tc) Surface Mount TO... |
DataSheet: | AOD9T40P Datasheet/PDF |
Quantity: | 1000 |
Vgs(th) (Max) @ Id: | 5V @ 250µA |
Package / Case: | TO-252-3, DPak (2 Leads + Tab), SC-63 |
Supplier Device Package: | TO-252, (D-Pak) |
Mounting Type: | Surface Mount |
Operating Temperature: | -55°C ~ 150°C (TJ) |
Power Dissipation (Max): | 83W (Tc) |
FET Feature: | -- |
Input Capacitance (Ciss) (Max) @ Vds: | 530pF @ 100V |
Vgs (Max): | ±30V |
Gate Charge (Qg) (Max) @ Vgs: | 18nC @ 10V |
Series: | -- |
Rds On (Max) @ Id, Vgs: | 800 mOhm @ 4A, 10V |
Drive Voltage (Max Rds On, Min Rds On): | 10V |
Current - Continuous Drain (Id) @ 25°C: | 6.6A (Tc) |
Drain to Source Voltage (Vdss): | 400V |
Technology: | MOSFET (Metal Oxide) |
FET Type: | N-Channel |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
AOD9T40P is a type of Field-Effect Transistor (FET) and one of the most widely used kinds of FETs due to the low cost and efficient performance. FETs are voltage-controlled electronic devices that use a semiconductor junction to control current flow in one or more directions. FETs are useful in a variety of applications and can be programmed to work as either N-channel or P-channel devices. In addition, FETs are also capable of providing high levels of gain and bandwidth. AOD9T40P is a type of MOSFET, which stands for metal-oxide-semiconductor field-effect transistor. MOSFETs have many of the same characteristics as FETs but with the added benefit of controlling current more efficiently. The AOD9T40P is an N-channel MOSFET with a 40V voltage rating and a 400mA maximum current rating.
AOD9T40P is mainly used as a switching device or a voltage regulator in switch-mode power supplies (SMPSs). In these applications, the device is used to regulate the voltage going to a load. When the load is drawing too much current, the AOD9T40P will turn off and prevent the voltage from rising too much. Conversely, when the load is drawing too little current, the AOD9T40P will turn on and provide the necessary voltage to the load. The device can also be used as a switch, allowing current to flow in one direction or another. This can be useful in controlling the flow of electricity or in providing protection from overvoltage or current.
The working principle of the AOD9T40P is based on the MOSFET structure. In a MOSFET, an oxide layer is sandwiched between the two source and drain terminals. A gate terminal is connected to the oxide layer and controls the current flow between the two terminals. When the gate voltage is at a low enough level, the oxide layer acts as an insulator and prevents current from flowing between the source and drain. When the gate voltage is at a high enough level, the oxide layer becomes conductive and allows current to flow. This is the basic working principle of the AOD9T40P. Since the MOSFET is voltage-controlled, it can be programmed to turn on and off and regulate the current at different voltage levels.
AOD9T40P is a reliable field-effect transistor that can be used in a wide range of applications. It is an economical and efficient device that can be programmed to meet specific needs. As a switching device or voltage regulator, the AOD9T40P can provide the necessary current for a variety of loads. With its easy-to-use voltage control, it is efficient and reliable for many applications.
The specific data is subject to PDF, and the above content is for reference
MOSFET N-CH 200V 31A D2PAKN-Channel 200V...
MOSFET N-CH 55V 440A TO-268N-Channel 55V...
MOSFET N-CH 800V 14A TO-247N-Channel 800...
MOSFET N-CH 600V 23A TO-268(D3)N-Channel...
MOSFET N-CH 200V 72A TO-268N-Channel 200...
MOSFET N-CH 800V 9A TO-268N-Channel 800V...