BAS28 TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diode rectifier arrays, such as the BAS28 TR are versatile modules used in a variety of applications. They are made up of a number of diodes connected in series, parallel and/or taps, arranged as a bridge or combination of bridges. These devices can be used to convert AC to DC, provide isolation, reduce harmonic currents and protect equipment from transients.

BAS28 TR diode rectifier arrays are designed for use as an AC / DC rectifier in industrial applications. They have an operating temperature range of -65°C to +125°C, with a current carrying capacity of 1A and a peak reverse voltage rating of 600V. This makes them suitable for many power conversion and voltage conversion tasks, such as making EU / US compatible electric motors, or reducing the voltage of a 24V electric motor to 12V.

The working principle of a diode rectifier array is based on the diode’s ability to conduct current in one direction and block it in the opposite direction. By arranging the diodes in series, parallel and/or taps, the current can be controlled, directed or limited. In the BAS28 TR, the bridge configuration enables the device to rectify AC voltage, converting it to DC, while providing electrical isolation between the input and output.

The bridge functions to provide a low voltage output when the positive or negative AC input alternates from positive to negative. This is done by allowing current to pass through on the positive side, and then blocking it on the negative side. The current is directed through the other group of diodes, allowing for the voltage to be stepped down. The bridge is often used with a transformer to reduce or step-down incoming power from high voltage lines to lower load levels.

The BAS28 TR also provides integrated filtering that increases the reliability of the power supply and reduces the risk of noise and interference to the system. This is accomplished by the use of a grid of capacitor cells, formed using a number of parallel and series connected electrolytic capacitors. This allows the device to filter out high-frequency noise and keep the output voltage at a steady level.

In addition to the AC to DC conversion and filtering, the BAS28 TR can also be used to reduce harmonic noise, as well as to provide protection against voltage surges and transients. This is done by using a series of protective diodes arranged in a “crowbar” configuration. This arrangement is designed to activate when voltage levels become excessive, shorting the line and protecting the system from damaging transients and surges.

The BAS28 TR diode rectifier array is a versatile and reliable device for many AC to DC conversion and voltage conversion tasks. Its integrated filtering and voltage surge protection provide reliable and efficient operation in a wide range of applications. The robust construction and wide operating temperature range make it an ideal choice for industrial applications where precision and reliability are essential.

The specific data is subject to PDF, and the above content is for reference