BAS20-G3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are vital components of numerous electrical and electronic circuits. A single diode, such as the BAS20-G3-18, is a device that allows current to flow only in one direction. On the outside, the BAS20-G3-18 looks like a black cylinder, with two end contacts. It is made from silicon semiconductor material and coated with a glass-like protective layer. The diode’s functional principle is based on the fact that the current only flows through it in one direction.

The BAS20-G3-18 has many applications, primarily as a rectifier. This means it is used to convert an alternating current (AC) signal into a direct current (DC) signal. This rectifying process requires two components: the anode and cathode. The current flow is in the forward direction from the anode to the cathode. The BAS20-G3-18 works best as a rectifier in devices with smaller current and voltage requirements.

The diode can also be used to protect electrical components from voltage spikes or surges, as it can block any reverse current. The BAS20-G3-18 is also used in protection circuits to limit the voltage on a particular side. Additionally, it is used in oscillators, converters, and voltage regulation circuits to help control the flow of current.

The BAS20-G3-18 is a standard silicon diode, and as such has typical characteristics as well-defined maximum turn-on voltage, maximum forward current and a reverse breakdown voltage. It is designed to deal with voltage of up to 200 volts, and currents of up to 0.2-0.3 Amps. Further, the BAS20-G3-18 has a turnaround time of less than 500ns and a reliable thermal performance.

The BAS20-G3-18 is relatively robust and has a low power consumption, meaning it does not generate a lot of heat when operated. In comparison with other rectifiers, the BAS20-G3-18 is a good choice if you need to control or manage a large current. The low power consumption of the BAS20-G3-18 also makes it an attractive choice for a range of applications, such as converting 230V AC into 5V DC.

The BAS20-G3-18 is a versatile single diode, suitable for a wide range of applications. Its simple rectifier design, high rating and low power consumption make it the go-to diode for many applications. The BAS20-G3-18 diode is reliable and has a low failure rate, making it a dependable choice for any electrical or electronic circuit.

The specific data is subject to PDF, and the above content is for reference