BAS70E6433HTMA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components commonly used in electronics circuitry. They allow current to flow in only one direction, and are used to prevent electrical overloading and shorts. The BAS70E6433HTMA1, part of the single rectifier diodes family, is designed for general use.

The BAS70E6433HTMA1 has a maximum repetitive peak reverse voltage (VRRM) of 70V and a maximum continuous forward current (IF) of 64mA. With a low, 0.03pF typical forward voltage (VF) and a maximum forward voltage of 0.34V, the BAS70E6433HTMA1 is also suitable for low-voltage applications. The maximum power dissipation (PD) is 430mW and the maximum junction temperature (Tj) is 150°C. In addition, it has a tape and reel package with an EIAJ stackable height of 3.0mm (typical) for automated assembly.

The BAS70E6433HTMA1 is designed for a wide range of applications, including general rectification, supervisory circuits and automotive electronic systems. However, it is important to note that the BAS70E6433HTMA1 should not be used in any circuit that requires a blocking voltage above 70V.

The BAS70E6433HTMA1 works according to the principle of rectification. Traditional rectifiers use two diodes that limit the flow of electrical current to one direction, while the BAS70E6433HTMA1 uses a single diode. This means that the voltage and current are only allowed to move in one direction, and any voltage and current in the opposite direction is not allowed to pass. This helps protect the device and prevents overvoltage and overcurrent in the protected circuits.

In addition, the BAS70E6433HTMA1 can be used as a switching device, allowing electric signals to be switched on and off as needed. This is because the diode will either pass or block the signal based on the current direction. It allows for the electric signal to be controlled and switched quickly and efficiently. It is also used in some power supplies as a power switch.

The BAS70E6433HTMA1 is an efficient solution for a variety of applications due to its low voltage and current capabilities, as well as its power handling abilities. It is also an excellent choice for low-voltage applications, as its low forward voltage allows it to be used in the place of two diodes while providing improved efficiency. The BAS70E6433HTMA1 therefore offers a reliable and cost-effective solution for a wide range of applications in the field of electronics.

The specific data is subject to PDF, and the above content is for reference