BC337-25ZL1

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Transistor Type:	NPN
Current - Collector (Ic) (Max):	800mA
Voltage - Collector Emitter Breakdown (Max):	45V
Vce Saturation (Max) @ Ib, Ic:	700mV @ 50mA, 500mA
Current - Collector Cutoff (Max):	100nA
DC Current Gain (hFE) (Min) @ Ic, Vce:	160 @ 100mA, 1V
Power - Max:	625mW
Frequency - Transition:	210MHz
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA) (Formed Leads)
Supplier Device Package:	TO-92-3
Base Part Number:	BC337

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BC337-25ZL1 Application Field and Working PrincipleTransistors - Bipolar (BJT) - Single are an essential component in any electronics or computer circuit, and the BC337-25ZL1 model is no exception. This component is a PNP Transistor that can be used for a variety of activities, such as amplifying or switching electronic signals. This section will discuss the general application fields of the component, how it works and how it compares to similar components.The BC337-25ZL1 is a small signal PNP transistor, and it comes in the TO-92 case. This component is an ideal choice for general applications that require small signal switching and amplification, such as switching relays, logic circuits, and Darlington emitter-follower buffering. Additionally, it can also be used as an input or output stage of small signal amplifiers and as a current gain stage of power amplifiers. This component can also be used in circuit applications operating with frequencies in the range of 100kHz up to 5MHz.The general operating principle of the BC337-25ZL1 component is based on the two general laws of electron flow. These two laws state that electrons flow from negative (source) to positive (drain) and that the current is proportional to the voltage applied. The component operates based on these principles, with the base-emitter junction receiving the signal and providing the electron current, and the collector and the base forming the common collector output from which the current is generated. When a signal is applied to the input, electrons (-) are injected into the base-emitter and this electron current is amplified and sent to the collector. This current can then be used to control the output. The gain of the component is controlled by the ratio of the collector to emitter current. This ratio can be adjusted by properly selecting the external resistor and capacitor values. The BC337-25ZL1 component is a versatile component with wide application field, and it can be used as an amplifier, switch, or current gain stage of a power amplifier. It is a relatively fast component with a range of frequencies from 100kHz to 5MHz, and it is also compact enough to fit in any circuit. Additionally, it can provide consistent operation with low power consumption and minimal noise. Compared to other similar components, such as the BC546, some advantages of the BC337-25ZL1 component include higher frequency capabilities (up to 5MHz), lower noise, and higher maximum collector currents (up to 800mA). On the other hand, the disadvantages of the BC337-25ZL1 include lower maximum voltage rating (60V) and a higher saturation voltage (0.6V).In conclusion, the BC337-25ZL1 is a small signal PNP transistor with a wide range of application fields. It can be used for small signal switching, amplifying, and current gain stages of power amplifiers. It has a broad frequency range of up to 5MHz and is capable of providing consistent operation with low power consumption and minimal noise. Compared to the BC546, it offers higher frequencies, lower noise, and higher maximum collector currents, but has a lower maximum voltage rating and higher saturation voltage.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description