BC548A A1G

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Active
Transistor Type:	NPN
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	30V
Vce Saturation (Max) @ Ib, Ic:	--
Current - Collector Cutoff (Max):	15nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce:	110 @ 2mA, 5V
Power - Max:	500mW
Frequency - Transition:	--
Operating Temperature:	-65°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-226-3, TO-92-3 (TO-226AA) (Formed Leads)
Supplier Device Package:	TO-92

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

BC548A A1G is a bipolar junction transistor (BJT) in the NPN package, commonly used in many types of electronic devices for power and signal amplification. It can be used in a wide range of applications, including switching and voltage regulation, as well as applications such as amplifiers and power supplies.

Application field

The BC548A A1G is used in many applications due to its small size, low voltage drop, and low power dissipation. It has a wide range of applications in both switching and linear circuits. It is also commonly used in high power audio amplifiers, radio frequency amplifiers, oscilloscopes, and other test equipment. It can also be used in radio receivers, low frequency amplifiers, and logic circuits.The BC548A A1G is also used in power supplies, audio amplifier circuits, and radio frequency circuits. In these applications, the transistor\'s low voltage drop, low power dissipation, and small size are highly advantageous.

Working principle

Under normal operating conditions, BC548A A1G operates by creating an electric field between its two diodes, or its base and collector. When the base and collector are not biased, current will be blocked from passing from the collector to the base. When a positive voltage is applied to the base, current will be allowed to flow from the collector to the base. The current will be limited by the resistance of the transistor. When a higher positive voltage is applied to the base, it creates an electric field in the transistor and increases the flow of current from the collector to the base. This increase in current is referred to as amplification and is the basis of all BJT circuits. When the voltage is removed from the base, the transistor stops conducting and prevents current from passing from the collector to the base. This is referred to as cutoff and prevents the transistor from overloading and damaging other components.

Conclusion

The BC548A A1G is a versatile bipolar junction transistor with many applications. It can be used in a variety of electronic circuits to provide an effective means of both switching and amplifying signals. The transistor\'s low voltage drop and power dissipation, along with its small size, make it ideal for use in high power audio amplifiers and other circuits. The BC548A A1G is a reliable and cost-effective solution for many electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description