BC817K-25VL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BC817K-25VL is a PNP transistor, especially suited for use in applications that require low noise and high current gain, such as audio power amplifiers and line drivers. It has a maximum collector current rating of 630mA and a maximum collector-emitter voltage rating of 25V. It is also designed to have a low reverse leakage current, which makes it ideal for use in DC-coupled circuits.

The design of a BC817K-25VL is based on a Silicon NPN collector region and a floating collector, consisting of a P-type silicon substrate. It has a maximum power dissipation rating of 500mW and an operating temperature range of -55~+125°C. The BC817K-25VL has a low noise figure of 9dB for 1kHz and a voltage gain of 10dB for 10kHz.

The basic working principle of the BC817K-25VL is that of a bipolar junction transistor (BJT). It operates as an amplifier or as a switch by controlling the current through a circuit. When there is no base current, the transistor is biased in the off-state, meaning the collector voltage is at its highest. When base current is applied, the transistor becomes saturated, meaning the collector voltage is at its lowest. This is known as the current gain characteristic of the BJT, where an increase in base current produces an increase in collector current.

The BC817K-25VL is widely used in applications such as audio power amplifiers, RF amplifiers, and line drivers that require low current gain and low noise. For example, it can be used as an audio power amplifier for stereo amplifiers, DVD audio amplifiers, and home theater systems. It can also be used as a line driver for digital audio systems and telecom applications. With its low noise performance and high current gain, it is also ideal for low frequency amplification of signals from microphones, audio-visual equipment, and other devices.

The BC817K-25VL is a convenient, low-cost option for designers of audio and telecom systems, allowing for the efficient amplification of signals with minimal circuitry. With its low noise performance, it is particularly suited for applications where a low signal-to-noise ratio is essential, such as RF amplifiers or audio amplifiers. Its floating collector also makes it suitable for use in DC-coupled circuits.

The specific data is subject to PDF, and the above content is for reference