BC858CWH6327XTSA1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transistors - Bipolar (BJT) - Single

The BC858CWH6327XTSA1 is a transistor designed for use in a variety of applications in modern electronics. It is a low-power transistor capable of switching small currents, making it ideal for scenarios that require precise control of logic signals. This transistor can also handle relatively large changes in voltage, making it useful for general amplification and switching applications.

Physical Properties and Dimensions

The BC858CWH6327XTSA1 transistor is a PNP type device with a maximum power dissipation of 500mW. It is constructed using silicon, has a collector-emitter voltage of 0.6V, and is available in a small 2-pin TO-92 package. This package is significant as it consolidates a lot of functionality into a small form-factor, allowing it to be easily integrated into Electronic designs of a variety of devices.

Polarity and Polarity Reversal Protection

The BC858CW6327XTSA1 is a PNP type transistor, meaning it is reverse-biased upon application of power. This is important to consider as in some applications, reverse-polarity can be a concern with small power transistors. The good news is that this particular device provides built-in protection for the reversed polarity, up to the collector-emitter voltage rating of 0.6V.

Rated Current and Peak Current

The maximum current ratings for the BC858CW6327XTSA1 are 2.0 A sustained as the rated current and 5.0 A peak. The peak current is significantly higher than the rated current, allowing it to pass more current if necessary. However, it is important to note that transistors can fail if subject to peak currents or voltages higher than specified, so it should not be operated outside the specified parameters.

Application Field and Working Principle

The broad application field of the BC858CW6327XTSA1 makes it one of the most flexible and powerful transistors available. It is used in general amplification and switching circuits, current sense amplifiers, logic-level functions, and more. As a logic device, it typically works in conjunction with logic gates as the output stage. When used for general amplification and switching, it acts as an amplifier, raising the current levels of a signal.

The BC858CW6327XTSA1 also has the advantage of being able to handle relatively large changes in voltage without failure. This makes it useful in scenarios where high current transients are a concern, such as when switching OFF power to a device. In addition, it has the ability to switch current in small increments, making the device great for controlling logic signals.

Conclusion

The BC858CW6327XTSA1 is a versatile transistor that can handle a myriad of applications in modern electronics. Its small form-factor, reverse-polarity protection, relatively high peak current, and decent voltage rating make it ideal for power-management, current sense applications, and general switching/amplification duties. Its wide application range makes it an invaluable component for any modern electronics designer.

The specific data is subject to PDF, and the above content is for reference