BCP55,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BCP55 and BCP115 are two types of bipolar junction transistors (BJT) commonly used in applications like amplifiers, switching, and more due to their low cost and high performance. They come in a variety of types such as NPN and PNP, low and high voltage, and low and high-current ratings.

A bipolar junction transistor has three terminals, a collector, an emitter, and a base. The collector is connected to the power source and the emitter is connected to ground. The base is used to control the current flowing between these two points. When a voltage is applied to the base, a current flows from the collector to the emitter. This current is regulated by the amount of current that flows from the base.

In the case of the BCP55 and BCP115 transistors, the collector is rated at up to 500V and -100V respectively, the base can be used with voltages of up to -7V and 6.5V respectively, and the emitter is rated up to 200mA and -50mA respectively. The BCP55 can handle currents of up to 500mA and the BCP115 up to 800mA.

These two transistors are primarily used in low and medium power applications such as amplifiers, switching, linear regulation, and more. In Linear Regulation applications, the BCP55 and BCP115 are able to provide a precise and stable output voltage. The output voltage is regulated by controlling the current through the transistor. This is accomplished by varying the base voltage of the transistor. The output voltage is equal to the current multiplied by the voltage drop across the transistor.

In Amplifier applications, the BCP55 and BCP115 are used as a variable gain amplifier. The gain of the amplifier is determined by the current flow through the transistor. The current can be controlled by varying the base voltage of the transistor. A higher voltage on the base will result in a higher current, increasing the gain of the amplifier.

In Switching applications, these two transistors can be used as a switch. When the base voltage reaches a certain level, the transistor will turn on and allow current to flow from the collector to the emitter. This allows the transistor to act as a switch, controlling the flow of current in a circuit.

The BCP55 and BCP115 transistors are used in a wide variety of applications and have relatively low cost and high performance. They can be used in amplifiers, linear regulation, and switching applications due to their low cost and high performance. The base voltage can be used to control the current flow through the transistor, allowing them to be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference