BZT52B4V3-E3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Zener diode is an electronic component which enables voltage and current stability in circuits. The BZT52B4V3-E3-18 is a single Zener diode that is widely used in various applications. It’s main application fields and working principles are discussed in this article.

BZT52B4V3-E3-18 is a 3.6 volt, 5 mA Zener diode with a standing breakdown voltage of 4.3 volts. The diode has a wide range of applications in linear voltage regulators, switch mode power supplies, decoding circuits, protection circuits, voltage level protection, and temperature coefficient compensation. The Zener breakdown voltage helps the device to remain stable and constant when the current through it increases. This ensures that the voltage and current supplied to the device remain stable.

When the electrical current passes through a diode it becomes forward biased, meaning that the diode only allows the current to flow in one direction, from the anode to the cathode. If the voltage applied and the diode’s characteristics match, a certain threshold can be reached, at which point the diode will become reverse biased, meaning the current is not allowed to flow in either direction. In other words, the diode becomes non-conductive. This voltage threshold is called the Zener voltage.

The Zener characteristic curve of the BZT52B4V3-E3-18 describes how the diode behaves with respect to voltage and current. In this curve, the maximum current occurs when the diode is forward biased, while the lowest occurs when the diode is reverse biased. As the voltage is increased further on the Zener characteristic curve, the current increases exponentially until it reaches the breakdown voltage. After this, the current lowers again and stabilizes at the breakdown voltage.

When used in a circuit, the diode helps stabilize the voltage. It allows some current to pass when the voltage is lower than the breakdown voltage, but not when it is higher. This makes it ideal for use in linear voltage regulators, as it helps keep the voltage stable regardless of the amount of current passing through the circuit. It is also used in switch mode power supplies, as it helps keep the output voltage constant.

The BZT52B4V3-E3-18 is a single Zener diode that is used in many applications. Its main application fields are linear voltage regulators, switch mode power supplies, decoding circuits, protection circuits, voltage level protection, and temperature coefficient compensation. Its working principle is based on the Zener breakdown voltage. When a current passes through the diode, the voltage increases exponentially until it reaches the breakdown voltage. After this, the current decreases, allowing the voltage to remain stable.

The specific data is subject to PDF, and the above content is for reference