BZT52B6V8-E3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZT52B6V8-E3-18 is a high power Zener diode designed for use in various electronic circuits, where a voltage regulator and protection from overvoltage is necessary. The device is part of a family of Zener diodes from NXP Semiconductors, world’s second largest semiconductor supplier.

A Zener diode is a special type of diode, designed to start conducting current when a certain set voltage is reached, allowing current to flow in both directions. This reverse current is referred to as the Zener current, and is used to keep the voltage in a circuit stable. Zener diodes are commonly found in power supply regulators, voltage references, overvoltage protection circuits, and other low power applications.

The BZT52B6V8-E3-18 has a total power dissipation rating of 0.2 watts and reverse voltage of 18V. It has an approximate zener current of 0.029mA, a leak-free junction with an operating temperature range of -65 to +150 degrees Celsius and a capacitance of 8 picofarads. The package is a DO207-2 surface mount.

In terms of applications, the BZT52B6V8-E3-18 is suited for applications such as pulse and signal shaping, voltage management, switching, and voltage clamping. It can also be used for voltage cascading and current limiting, allowing for the flow of very small currents in the reverse direction. The device is also useful for parallel operation for additional current capacity.

More specifically, the BZT52B6V8-E3-18 can be used for protection against overvoltage in low power circuits, especially those where the input voltage is changing. It can serve as an effective regulator, helping ensure that the output current remains constant in spite of fluctuations in the input voltage. The device can also be used in current limiting applications, where a fixed device is required to limit the amount of current passing through the diode in order to protect other components from excessive current. The device is also useful for parallel operation for additional current capacity.

In terms of its working principle, the BZT52B6V8-E3-18 works by restricting current flow in one direction while allowing a controlled amount of current to flow in the opposite direction. It is a “reverse polarity” device, meaning that the current flows out of anode and into the cathode (as opposed to the opposite flow in most other diode applications). When the applied voltage across its zener region exceeds its rated zener voltage, the diode starts to conduct in reverse, allowing current to flow between anode and cathode, thus acting as a voltage regulator.

When the applied voltage exceeds the zener voltage, the device reaches its reverse breakdown voltage, after which the device gets saturated. Once the reverse saturation current is reached, the device starts acting like a resistance – restricting current from flowing in the reverse direction. This controlled amount of current is referred to as the Zener current.

The BZT52B6V8-E3-18 is a high power, low voltage Zener diode with a wide operating temperature range and reverse breakdown voltage of 18V. It is suitable for various applications such as voltage regulation, limiting, and clamping. The device is also useful for parallel operation for additional current capacity. It works by allowing a controlled amount of current to flow in the reverse direction when the applied voltage exceeds the zener voltage, thus providing voltage regulation.

The specific data is subject to PDF, and the above content is for reference