BZT52C2V4-7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZT52C2V4-7 diode is classified in the diodes - Zener - Single category and is used mainly for stable voltage reference. It has a wide variety of use cases and applications depending on the level of current and voltages needed in the circuit. Knowing the working and application principle of this diode will help circuit designers to understand how to properly integrate and use it in their design.

Introduction to BZT52C2V4-7

The BZT52C2V4-7 is a Zener Diode, which is an electronic component that contains two leads, Anode (A) and Cathode (K). It belongs to the single diode type; therefore, it can only be used and implemented as a one-way device. It is designed primarily for regulating and stabilising the voltage across a circuit. This diode has a maximum power dissipation of 500mW, with a max Zener current of 0.3mA, and a Zener voltage of 4.7V.

Application Field and Working Principle

The BZT52C2V4-7 works in a very similar way to a normal diode, as it still passes current in one direction only from the Anode (A) cathode (K), but with a few distinct differences. The diodes made up of a single p–n junction and allow to stabilise voltage levels in the circuit by controlling and regulating the amount of current passing in one direction. When the voltage difference between the anode and the cathode is large enough, the Zener diode will start to conduct, passing current in reverse. This diode also has a reverse breakdown voltage, also known as the zener voltage. At this zener voltage, the diodes starts to conduct in reverse, allowing a small current to flow through it. The BZT52C2V4-7 is mainly used in cases where some form of reference voltage is needed for another circuit component. It can be used as a voltage regulator, as an over-voltage protector, or in edge detection applications. In voltage regulator applications, the circuit will use the diode\'s reverse breakdown voltage as the reference voltage. Any peak voltages that come in from the input power source will be stopped from reaching the load. Using the diode in these scenarios also reduces electrical noise and interference, as the diode stops most of the fluctuations and unwanted signals from passing through.

In edge detection applications, the Zener Diode temporarily stores the over-voltage in the capacitor until the voltage levels settle down to the original value. This process allows the current to slowly build up and the voltages slowly ramp-up before settling down again to its original levels. Besides these applications, the zener diode can also be used as a voltage limiter in cases where over-voltage protection is needed in the circuit, such as Laptop PCMs, HDDs, and Mobile phones.

Conclusion

In conclusion, understanding the working principle and application field of the BZT52C2V4-7 diode will help circuit designers to properly integrate and use it in their design. This Zener diode can be used mainly for voltage stabilising and reference, allowing to filter out any unwanted or higher voltage signals and peak voltages coming in from the input power source. It also has other uses such as in edge detection, over-voltage protection, and voltage limitation. Any circuit or device that needs to stabilise, protect or detect voltage levels, can potentially use the BZT52C2V4-7 Zener Diode.

The specific data is subject to PDF, and the above content is for reference