BZT55B16-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical components that allow electrical current to flow in one direction, with the same voltage applied to both ends. Zener diodes are a type of diode that allows current to flow in both directions, while maintaining a constant voltage drop across the diode. Single Zener diodes are a single diode, with one end connected to the anode, and the other end connected to the cathode. The BZT55B16-GS18 is a single Zener diode particularly intended for use in low voltage circuit protection applications, such as power supplies, motor controls, and logic circuits.

The BZT55B16-GS18 has a maximum reverse blocking voltage rating of 18 volts (V), with a maximum continuous forward current rating at 300mA (milliamps). It has a zener voltage of between 14 to 16 volts, a power dissipation of 500mW, and a maximum forward voltage of 1.2V at a forward current of 300mA. It has a low forward voltage drop, with an active power dissipation at 300mA of 230mW. It also has a junction temperature of -55 to 150 degrees Celsius. Other features include an inductive load capability of 150mA, typically low capacitance of 1.2 pF (picofarads) with a reverse recovery time of less than 0.5ns (nano-seconds).

The BZT55B16-GS18 is primarily used for ESD (electrostatic discharge) protection during sudden voltage spikes and over-voltage transients. It performs by limiting voltage flow and suppressing the over-voltage from exceeding the maximum rated level. As a result, this provides a safety device that helps maintain steady voltages in downstream components. The BZT55B16-GS18 can also be used as a voltage regulator, with the zener voltage of 14-16V maintaining steady voltage levels for components within its regulated range.

The working principle of the BZT55B16-GS18 is based on the fact that the forward voltage drop across the junction of a diode is always higher than the reverse breakdown voltage. This means that if a positive voltage is applied to the anode, the current will remain constant up to a certain point. Once this point is reached, the voltage will begin to increase, causing a breakdown in the diode and allowing a current to flow. In this way, the diode acts as a limiting device, providing a steady and controlled current for the downstream components.

Overall, the BZT55B16-GS18 is an efficient and reliable single Zener diode, capable of providing ESD protection and also acting as a voltage regulator to help maintain steady voltage levels for downstream components. It can be used in a wide range of low voltage circuit protection applications, and is ideal for power supplies, motor controls, and logic circuits. With its high surge current capability, low forward voltage drop, and low capacitance of 1.2pF, this diode can easily handle high voltage transients while providing the necessary protection for its downstream components.

The specific data is subject to PDF, and the above content is for reference