CNY117F-2X007T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are a type of electrical insulation standing between two signal lines. They use an optical interface to help reduce electrical noise and lower risk of fires and shocks. The CNY117F-2X007T is a transistor photovoltaic output (TPO) optoisolator that is designed for use in applications including information transmission, remote control, display, electric power measurement, computer interface, motor control, and data acquisition.

AC/DC Power Conversion

CNY117F-2X007T optoisolators are designed for use in AC/DC power conversion. These devices allow for efficient power conversion from AC to DC power, which is required in certain applications where AC electricity is not available. The optoisolator is able to provide electrical insulation between the AC power source and the DC power end device, making it safe for the end user. In addition, the optoisolator reduces electrical noise, which can be capable of affecting the proper operation of DC devices.

Data Communications

The CNY117F-2X007T optoisolator is designed to be used in data communications. The optoisolator can be used to provide electrical insulation between the two signals present. This eliminates potential electrical disturbances and interference that can significantly alter the transmitted data. Additionally, the optoisolator can be used to detect and filter out noise and other disturbances from the data being transmitted, ensuring the data accuracy and integrity.

Motor Control

Optoisolators are frequently used in motor control applications. These devices can be used as isolators between the electrical signals present in a motor and its control unit. This helps to reduce the chances of electrical leakage while allowing the electrical signals to pass through accurately. The optoisolator also helps to reduce the risk of electrical accidents and improve the efficiency of the motor controller.

Working Principle

The CNY117F-2X007T optoisolator has a working principle that is based on the principle of light modulation. This device utilizes LEDs (light emitting diodes) as the optical signal source, which is connected to the input circuit. The light energy from the LED is then modulated and detected by an optical detector, which is connected to the output circuit. When an electrical voltage is applied to the input circuit, the LED will emit light that is then detected by the optical detector resulting in an electrical voltage in the output circuit. Thus the CNY117F-2X007T optoisolator can be used to provide electrical insulation between two electrical signals while allowing them to be accurately transmitted.

The specific data is subject to PDF, and the above content is for reference