CNY17F1TVM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are devices used to electrically isolate two systems from each other in order to prevent current or voltage spikes from affecting the other system. Optoisolators are basically made up of a transmitting device, usually an LED, and a receiving device, either a transistor or a photovoltaic cell. The CNY17F1TVM optoisolator is a type of optoisolator with a transistor output. It is designed to provide a highly reliable method of optical isolation between two circuits.

The most common application of the CNY17F1TVM optoisolator is for interfacing two systems or circuits that need to be isolated. It is often used in industrial control systems, medical devices, or any system where electrical isolation is required to protect fragile electronic components. It can also be used to interface an Input/Output (I/O) system or provide electrical isolation for an analog signal. The optoisolator can also be used as a level shifter, allowing one circuit’s output voltage to interface with another circuit’s input voltage without the need for a voltage divider.

The CNY17F1TVM optoisolator is a single channel, transistor output optoisolator that features a blue LED and a photosensitive integrated circuit. It is rated for a maximum current of 30 mA and a maximum voltage of 12 VDC. It comes in a hermetically sealed 5-pin package. The device operates at a frequency range of 5 kHz to greater than 300 kHz.

At the heart of the CNY17F1TVM optoisolator is an LED that emits light. The light passes through a clear window in the package and is focused onto a photodiode or phototransistor. When a voltage is applied to the anode of the LED, a current is conducted, which causes the LED to emit light. The light is detected by the receiver, which then acts as a gate to the output transistor, allowing current to pass through. This current is then passed through the output transistor, which is then passed to the circuit that needs to be isolated.

The transistor output of the CNY17F1TVM optoisolator allows for the device to switch quickly and reliably, making it ideal for low current switching applications. The optoisolator also features electrostatic discharge (ESD) protection on the output transistor, making it resistant to electrical noise and transient voltage spikes.

The CNY17F1TVM optoisolator is a reliable and versatile optoisolator that can be used for a wide range of isolation applications. It provides a high level of protection against ESD and other electrical interference, allowing for reliable operation in a wide variety of industrial, medical, and other applications. The fast switching capability and low current requirements make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference