DRC5113Z0L Discrete Semiconductor Products

Resistor - Emitter Base (R2):	10 kOhms
Base Part Number:	DRC5113
Supplier Device Package:	SMini3-F2-B
Package / Case:	SC-85
Mounting Type:	Surface Mount
Power - Max:	150mW
Current - Collector Cutoff (Max):	500nA
Vce Saturation (Max) @ Ib, Ic:	250mV @ 500µA, 10mA
DC Current Gain (hFE) (Min) @ Ic, Vce:	30 @ 5mA, 10V
Series:	--
Resistor - Base (R1):	1 kOhms
Voltage - Collector Emitter Breakdown (Max):	50V
Current - Collector (Ic) (Max):	100mA
Transistor Type:	NPN - Pre-Biased
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DRC5113Z0L is a single pre-biased bipolar transistor that is typically used in low-noise amplifier, high-frequency circuits and signal processors. This device has a power output of approximately 5 watts and a frequency response range of up to 1 MHz. It is also suitable for use in switching systems and as a general purpose amplifier.The DRC5113Z0L is a three-terminal device with an emitter, base, and collector. The emitter is the source of the current flowing through the device and the current is then passed through the base, which determines the voltage and the amount of current that will flow through the device. The collector serves to collect the current from the base and output it at the necessary voltage.The DRC5113Z0L is designed to operate under two-wire biasing, which is a technique used to balance the transistor\'s current and voltage by controlling the current and potential differences at the emitter and base. This is done by creating an emitter-to-base voltage divider and adjusting the current in both the emitter and base. As the current through the emitter and base are kept in balance, the output current is also kept in balance. The output current is controlled by a bias resistor connected to the emitter.When the device is used as a low noise amplifier, it is important that the bias resistor is chosen to ensure low distortion and minimum noise. This is important because a device that produces too much noise can affect the quality of the output. A bias resistor that is too high may cause too much noise and may cause the amplifier to become unstable.For high-frequency applications, the DRC5113Z0L is used as a differential amplifier and is configured as a cascode configuration with two transistors, one operating as an input stage and the other as an output stage. This device is used to amplify signals with a frequency of up to 1 MHz. This is a high frequency device and it is important to choose components that can withstand the distortion and noise associated with these frequencies. In some cases, additional components may need to be added to reduce this noise and distortion.The DRC5113Z0L is a versatile device and is used in many applications, including low-noise amplifiers, high-frequency circuits, signal processors and switching systems. It is designed for use in two-wire biasing and has a power output of 5 watts and a frequency response range of up to 1 MHz. The device is designed for use in low noise and distortion applications and can be used as a differential amplifier for high-frequency applications. When used with the proper bias resistor, the DRC5113Z0L performs with minimal noise and distortion and can be an invaluable asset to many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description