DRC5114W0L

Resistor - Emitter Base (R2):	4.7 kOhms
Base Part Number:	DRC5114
Supplier Device Package:	SMini3-F2-B
Package / Case:	SC-85
Mounting Type:	Surface Mount
Power - Max:	150mW
Current - Collector Cutoff (Max):	500nA
Vce Saturation (Max) @ Ib, Ic:	250mV @ 500µA, 10mA
DC Current Gain (hFE) (Min) @ Ic, Vce:	20 @ 5mA, 10V
Series:	--
Resistor - Base (R1):	10 kOhms
Voltage - Collector Emitter Breakdown (Max):	50V
Current - Collector (Ic) (Max):	100mA
Transistor Type:	NPN - Pre-Biased
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DRC5114W0L is a type of single, pre-biased, bipolar junction transistor (BJT). It has various applications, due to its low current-noise and low voltage characteristics. This type of transistor is typically used in audio applications, such as amplifiers and speakers, as well as other small-signal applications.The DRC5114W0L is commonly used as a voltage amplifier or buffer in digital circuits. It has two different current gain ranges, one between 25 and 300 and the other between 10 and 1000. The voltage range is typically between 0.9 and 4.5 volts, making it suitable for applications such as powering LEDs.The DRC5114W0L has an emitter-base bias voltage of 0.7V and a base-collector bias voltage of 0.6V. It has a maximum operating frequency of 100MHz, making it suitable for high-frequency applications. The transistor has two transistors built in, with one operating as a PNP transistor and the other as an NPN transistor. The quiescent collector current is 3mA and the collector-emitter saturation voltage is 0.15V.The working principle of the DRC5114W0L is based on the basic principles of BJT transistors. There are two junctions between an emitter, base and collector; when current is passed through the base-emitter junction, it turns the transistor on, allowing current to flow through the collector-emitter junction. This current transfer is governed by the values of the current gain and the base-emitter voltage.The DRC5114W0L is a general purpose PNP-NPN transistor and is suitable for many applications. Due to its low current-noise, low voltage, and high operating frequency, it is ideal for audio, digital and small-signal applications. Its two built-in transistors make it versatile, allowing it to be used in both PNP and NPN configurations. The wide current gain range and low saturation voltage make it an ideal choice for powering LEDs in digital circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description