DS1013G-25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Delay lines are electrical circuits used to delay signals. DS1013G-25 is a fixed delay line designed for fast pulse delay. It requires only a single TTL-compatible logic output. The DS1013G-25 can offer delays up to 25 ns with a typical jitter of 0.7 ns RMS over the entire common mode temperature range.

The DS1013G-25 shares design features with other devices in the family, such as a transmit driver, clock input, delay input, and receive output. The transceiver can have three differential inputs, XIN, XOUT, and CIN, and four differential outputs, XIN, XOUT, CIN, and OUT. The outputs are used to drive the clock input and the delay input, allowing for pulse delay up to 25 nanoseconds. The receive output can be used to delay the output pulse and minimize unwanted coupling.

The DS1013G-25 is suitable for use in high-speed applications, such as data communications and signal processing. It is also suitable for use in RF and optical communications, where it can be used to add a fixed delay to the incoming signals. In addition, the DS1013G-25 can be used in synchronization, timing, and clock recovery applications. It can also be used to delay logic signals for noise reduction.

The DS1013G-25 works by accepting a logic signal at the input, which is then detected by the clock input. The clock input is then used to trigger the delay input, which passes the signal on to the output. The delay is determined by the frequency of the clock signal, which is typically between 5 and 10 MHz. The delay time can also be adjusted by changing the frequency of the clock signal. The receive output can then be used to further delay the output pulse and minimize unwanted coupling.

The working principle of the DS1013G-25 is relatively straightforward. The input signal is detected by the clock input, which then triggers the delay input. The output signal is then delayed by the preset delay time before being passed onto the receive output. The advantage of this design is that it requires only a single logic output, making it suitable for use in a variety of applications, including data communications and signal processing. The delay time can also be adjusted by changing the frequency of the clock signal.

In conclusion, the DS1013G-25 is a fixed delay line designed for fast pulse delay. It has a delay range up to 25 ns and operates on a single TTL-compatible logic output. It is suitable for use in high-speed applications, such as data communications and signal processing, and can also be used in synchronization, timing, and clock recovery applications. Its working principle is relatively straightforward, with the input signal being detected by the clock input, triggering the delay input and allowing for a adjustable delayed output.

The specific data is subject to PDF, and the above content is for reference