DTC123YUAT106

Series:	--
Packaging:	Tape & Reel (TR)
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Transistor Type:	NPN - Pre-Biased
Current - Collector (Ic) (Max):	100mA
Voltage - Collector Emitter Breakdown (Max):	50V
Resistor - Base (R1):	2.2 kOhms
Resistor - Emitter Base (R2):	10 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce:	33 @ 10mA, 5V
Vce Saturation (Max) @ Ib, Ic:	300mV @ 500µA, 10mA
Current - Collector Cutoff (Max):	500nA
Frequency - Transition:	250MHz
Power - Max:	200mW
Mounting Type:	Surface Mount
Package / Case:	SC-70, SOT-323
Supplier Device Package:	UMT3
Base Part Number:	DTC123

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The DTC123YUAT106 is a single, pre-biased, bipolar junction transistor (BJT) which is used in wide range of applications. It has a maximum collector-base voltage of 30V, minimum collector current of 1mA, and a maximum gain of 500 at 25°C. The device is designed for low current applications, making it well suited for use in power supplies, active filters, audio amplifiers, and automotive electronics applications.</p><p>A bipolar junction transistor (BJT) is an electronic device composed of three terminals, namely the emitter (controlled by the input voltage) and collector (controlled by the output voltage), and sometimes a third, the base. The BJT works by allowing electrons to flow from the emitter terminal to the collector terminal when it is switched on and the current flow is controlled by the input voltage applied to the base terminal. This type of transistor is most commonly used in amplifying applications.</p><p>The DTC123YUAT106 is a single, pre-biased BJT, meaning it has a bias current already established in the base-emitter junction when the device is turned on. This allows the device to instantly switch on and start to draw current. This is beneficial in applications where a high speed of operation is desired, and in some cases can also help to increase efficiency as less power is required to switch the device on and off. </p><p>The DTC123YUAT106 has a minimum collector-base voltage of 30V, minimum collector current of 1mA and a maximum gain of 500 at 25°C. This makes it suitable for use in low current applications, such as power supplies, active filters, audio amplifiers, and automotive electronics applications.</p><p>The device works by controlling the flow of electrons from the emitter terminal to the collector terminal when a base voltage is applied. This base voltage can be provided by an external source or by the internal bias current established in the base-emitter junction. When electrons are pulled from the emitter terminal to the collector terminal, a current is established and amplified, resulting in the amplification of the signal. This type of transistor is extremely useful and is widely used in a number of different electronic circuits.</p><p>The DTC123YUAT106 can be used in a variety of applications, including power supplies, active filters, audio amplifiers, and automotive electronics applications. In power supplies, it can be used as a switching device to control high voltages and currents and can provide efficient control of power delivery. In audio amplifiers, it can be used to provide a high quality signal amplification with low power consumption. In automotive electronics, it can be used to control the flow of signals in order to reduce noise and interference.</p><p>The DTC123YUAT106 is an efficient, single, pre-biased, bipolar junction transistor (BJT) which is suitable for a variety of low-current applications. It has a maximum collector-base voltage of 30V, minimum collector current of 1mA, and a maximum gain of 500 at 25°C. This makes it well suited for uses in power supplies, active filters, audio amplifiers, and automotive electronics applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description