GP10-4002E-M3/54

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10-4002E-M3/54 is a single rectifier diode. It is known for being able to handle high currents and voltages, making it suitable for applications where high power is required. This diode can be found in the automotive, industrial, and telecom industry, and is commonly used in power supplies, solar power systems, and power conversion applications.

The GP10-4002E-M3/54 diode has a maximum forward voltage of 400V, and can handle up to 2A of direct current (DC) with a forward voltage drop of 1.2V. Its reverse voltage rating is 1000V, and it is also capable of handling 10A of reverse current with a maximum reverse voltage drop of 0.5V. The diode has a recovery time of 5µs, making it suitable for switching and motor control applications.

GP10-4002E-M3/54 single rectifier diode works on the concept of PN junction diode. Its inner PN junction is made up of two separate semi-conductor sections that consists of the P type and N type material on either side. When forward biased the P type material, which is positively charged allows the electron current to flow from the N-type material to the P type material with minimum resistance.

In reverse bias condition, the flow of electron current is impeded to flow from the P type material to the N type material. In order to maintain low resistance path for the electron current flow from the N-type material to the P type material, the junction semiconductor material is designed in such a manner to form depletion region on either side of the PN junction plane.

Apart from blocking current flow during reverse bias, GP10-4002E-M3/54 single rectifier diode is also used as part of voltage clamping circuit to protect sensitive electronic components from the over voltage condition. This is due to the general rise in the voltage across the diode proportional to the amount of current that is passing through it during the forward biased condition.

Another major application of GP10-4002E-M3/54 single rectifier diode is its use as a rectifier. This is due to the fact that it can be used to convert alternating current (AC) to direct current (DC). During the forward biased condition, the diode behaves as an open switch that allows the positive cycle of the AC waveform to pass through with low resistance. While during the negative cycle of the AC waveform, the diode acts as a closed switch and does not allow any kind of current flow.

This type of single rectifier diode is also used as a voltage regulator. Since the voltage across it increases in a linear manner with respect to the increasing current, it can be used to regulate the output voltage of power supplies. This is done by selecting a proper reverse voltage value and biasing the diode to run only at the required amount of current.

GP10-4002E-M3/54 single rectifier diode is widely used in many electronic devices and systems to perform a variety of functions including blocking of unwanted currents, preventing overvoltage conditions and current regulation. It can also be used to convert AC to DC and acts as a voltage regulator to maintain the output voltage at a predetermined level. The diode is used in various industries including automotive, industrial, and telecommunication.

The specific data is subject to PDF, and the above content is for reference