GP10-4003-E3/73

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	200V
Current - Average Rectified (Io):	1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	--
Base Part Number:	GP10-4003

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10-4003-E3/73 is a single-phase, three-wire, full-controlled rectifier module (silicon rectifier bridge) developed by the Japanese semiconductor maker Diode Semiconductor & Electronics Corporation. It belongs to the diodes- rectifiers- single category. The rectifier module can be widely used in power converters, electric vehicles, photovoltaic power, green energy sources such as wind power and other applications. In addition, it can be used in frequency conversion systems, UPS systems and military power systems. The working principle of the rectifier bridge is the the same as that of conventional silicon rectifier bridge. It consists of two antiparallel diodes connected in series with a common low resistance connection at its output (anode). The working voltage is equal to the input voltage, and the base voltage is higher than the diode forward voltage drop. The output current is controlled by dual control signals of VCONT and ICONT. When the input voltage and load current are within their application range, the rectifier bridge will operate normally. The VCONT and ICONT control signals can adjust the output voltage and current to a given value. In case of over-voltage or over-current, the rectifier bridge can protect itself in a very short time by shutting off the voltage and current outputs. When the over-voltage or over-current is released, the device will immediately resume normal operation. The control signals VCONT and ICONT used by the rectifier bridge mostly use several methods including voltage, current, pulse width modulation (PWM) and phase shift control. The PWM and phase-shift methods use a pair of complementary signals, which are applied to the rectifier bridge from the control circuit. The frequency and duty cycle of the PWM voltage determine the effective value of the output current that can be obtained from the rectifier. The phase-shift control method is a further improvement of the PWM method, in which two phase-shifted complementary signals are used as the PWM control signals. Through the phase shift, the two signals are changing with time according to the same phase relationship. This reduces the switching losses of the rectifier bridge and improves the performance, making it much more efficient than the traditional PWM control method. The working principle of the GP10-4003-E3/73 rectifier bridge is the same as any other rectifier bridge. Its high efficiency and low energy consumption make it ideal for power converters and other applications where power and efficiency are of paramount importance. Not only is it economical and efficient, but it is also very reliable and is approved for high-voltage applications. The GP10-4003-E3/73 rectifier bridge is a very versatile device due to its wide operating temperature range, high surge capability and adjustable frequency range. Its high current and voltage capability, as well as its long life, make it a reliable and durable rectifier bridge that is suitable for many types of applications. Its ability to control and regulate the output current and voltage makes it a perfect choice for use in power converters, electric vehicles, and photovoltaic power systems. With its digital control and monitoring functions, the GP10-4003-E3/73 rectifier bridge is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description