GP10-4005-E3/73

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io):	1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	--
Base Part Number:	GP10-4005

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

:

GP10-4005-E3/73 Application Field and Working Principle

Introduction

GP10-4005-E3/73 is a rectifier diode designed to convert alternating current (AC) to direct current (DC). This type of rectifier is most commonly used in power supplies, replacing bulky and inefficient linear regulators. As a single component, GP10-4005-E3/73 provides a simple and efficient way to supply power from an alternating power source to a load.

Application Field

GP10-4005-E3/73 is commonly used in switch-mode power supplies and AC/DC power converters. It can also be used in other applications such as voltage converters, power supplies, and battery chargers. Additionally, rectifier diodes can be used in circuits such as radio frequency choke circuits and low-current sensing circuits.

Working Principle

The working principle of a rectifier diode, such as GP10-4005-E3/73, is based on the fact that it conducts current in only one direction. When the current flow is in one direction, the diode is forward biased and it allows current to flow through it. When the current flow is in the opposite direction, the diode is reverse biased, and the current does not flow through it. This behavior is due to the structure of the diode, which consists of two different types of semiconductor material, the N-type and the P-type. The N-type material is negative, and the P-type material is positive. In a typical power supply application, the rectifier diode is connected to an AC voltage source, such as a transformer or alternator. The AC voltage gradually increases and decreases in magnitude over time, in a sine wave pattern. As the AC voltage reaches its peak, the diode allows the current to flow through it and the current is converted to a DC voltage. The current will only flow through the diode when the voltage of the AC source is higher than a certain threshold (the forward bias voltage). When the voltage of the AC source is lower than the forward bias voltage, the diode is in reverse bias and there is no current flow.

Conclusion

GP10-4005-E3/73 is a rectifier diode designed for power conversion applications. It works by allowing current to flow in one direction, and blocking it in the other, converting alternating current to direct current. This makes it an ideal component for switch-mode power supplies, voltage converters, AC/DC power converters and other similar applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description